Linking And Unlinking The Remote Keyless Entry Transmitter To Memory - Dodge 2015 Grand Caravan Owner's Manual

4. Within five seconds, press and release either of the
memory buttons (1) or (2). The Electronic Vehicle
Information Center (EVIC) will display which
memory position has been set.
NOTE:
• Memory profiles can be set without the vehicle in
PARK, but the vehicle must be in PARK to recall a
memory profile.
• To set a memory profile to your RKE transmitter, refer
to "Linking And Unlinking The Remote Keyless Entry
Transmitter To Memory" in this section.
Linking And Unlinking The Remote Keyless Entry
Transmitter To Memory
Your RKE transmitters can be programmed to recall one
of two pre-programmed memory profiles by pressing the
UNLOCK button on the RKE transmitter.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217
NOTE: Before programming your RKE transmitters you
must select the "RKE Linked To Memory" feature
through the Electronic Vehicle Information Center
(EVIC). Refer to "Electronic Vehicle Information Center
(EVIC) " in "Understanding Your Instrument Panel" for
further information.
To program your RKE transmitters, perform the follow-
ing:
1. Cycle the vehicles ignition to the OFF position.
2. Select a desired memory profile (1) or (2).
NOTE: If a memory profile has not already been set,
refer to Programming The Memory Feature in this
section for instructions on how to set a memory profile.
3. Once the profile has been recalled, press and release
the SET (S) button on the memory switch.
I n f o r ma t i o n P r o v i d e d b y :
3