Linking And Unlinking The Remote Keyless Entry Transmitter To Memory - Dodge Durango 2015 Owner's Manual

168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE:
• Memory profiles can be set without the vehicle in
PARK, but the vehicle must be in PARK to recall a
memory profile.
• The Recall Memory with the "Memory To FOB" fea-
ture can be enabled through the Uconnect® system
screen. Refer to "Customer- Programmable Features —
Uconnect® Access 8.4 Settings " in "Understanding
Your Instrument Panel" for further information.
Linking And Unlinking The Remote Keyless Entry
Transmitter To Memory
Your RKE transmitters can be programmed to recall one
of two pre-programmed memory profiles by pushng the
UNLOCK button on the RKE transmitter.
NOTE: Before programming your RKE transmitters you
must select the "Memory To FOB" feature through the
Uconnect® system screen. Refer to "Uconnect® Settings "
in "Understanding Your Instrument Panel" for further
information.
To program your RKE transmitters, perform the follow-
ing:
1. Cycle the vehicles ignition to the OFF position.
2. Select a desired memory profile (1) or (2).
NOTE: If a memory profile has not already been set,
refer to Programming The Memory Feature in this
section for instructions on how to set a memory profile.
3. Once the profile has been recalled, push and release
the SET (S) button on the memory switch.