Table of Contents
Advertisement
Quick Links
N-LINE
User Manual and Instructions
UPS
Table of contents
1. Introduction................................................................................ 2
1.1 System Introduction ..........................................................2
1.2 Product Features ..............................................................3
1.3 Safety Precautions ............................................................4
1.4 Switches and Panel Indicators ..........................................6
2. Installation and Operation.......................................................... 7
2.1 Unpacking and Inspection.................................................7
2.2 RACK Installation ..............................................................7
2.3 Wiring Method ...................................................................8
2.4 ON and OFF operation of the unit.....................................8
2.5 Battery Maintenance .........................................................9
3. Troubleshooting....................................................................... 10
3.1 Led and Diagnostic audio alarms .................................... 10
3.2 Troubleshooting .............................................................. 10
3.3 Significance of alarm sounds .......................................... 12
4. Time Endurance of Batteries ................................................... 12
5. Communication Interface Port ................................................. 13
6.
Electrical Specification ............................................................ 14
6.1 Input ............................................................................... 14
6.2 Output............................................................................. 15
6.3 Internal Battery Pack ..................................................... 16
6.4 End of Discharge Voltages ............................................. 16
6.5 Mechanical Requirements .............................................. 16
6.6 Audible Noise.................................................................. 17
1
Advertisement
Table of Contents
Related Manuals for Orion SCR2
Summary of Contents for Orion SCR2
-
Page 1: Table Of Contents
Table of contents N-LINE 1. Introduction................2 1.1 System Introduction ............2 1.2 Product Features ..............3 1.3 Safety Precautions ............4 1.4 Switches and Panel Indicators ..........6 2. Installation and Operation............7 2.1 Unpacking and Inspection..........7 2.2 RACK Installation ..............7 2.3 Wiring Method ..............8 2.4 ON and OFF operation of the unit........8 2.5 Battery Maintenance ............9 3. -
Page 2: Introduction
Battery Pack 1. Introduction 1.1 System Introduction This rack-mounted UPS can be installed into a 19” rack, placed together with all your networking equipment, Hub Switches and Remote Routers in a single computer equipment room so that all devices are protected by the UPS; the setup has a fashionable look, too. -
Page 3: Safety Precautions
It is strictly forbidden to expose the battery or battery pack to fire, or 1.2.2 Mechanical specifications explosion and injury may occur. Never dismantle or damage the battery arbitrarily, or else the battery fluid may spill out. The battery fluid is highly corrosive; it may cause severe injury Dimensions (mm) Weight (kg) Model... -
Page 4: Switches And Panel Indicators
2. Installation and Operation 1.4 Switches and Panel Indicators 2.1 Unpacking and Inspection Power switch: Press the “On/Mute” button on the front panel to switch the UPS on. Press the “Off” button on the front panel to In case of any damage of the carton package, please contact the shipper switch the UPS off. -
Page 5: Wiring Method
(4) Check and tighten all bolts, then and the “BYPASS” indicator will go out. At this point, the UPS unit has insert the UPS cabinet into the entered into normal operation. rails on the RACK with the rear In case the bar-type indicator indicates a load exceeding 100%, the side of the cabinet slanting up, buzzer will beep every half second, alerting the user that excessive load then lift the front side of the... -
Page 6: Troubleshooting
AC input LED Frequency of power UPS output frequency not synchronized with 3. Troubleshooting blinks mains exceeds UPS Power Mains. Please check UPS input for rating by ±5% range. normal frequency. May be that the power source is a generator. When you call for service, please provide the following information: Battery LED lights UPS has no input... -
Page 7: Significance Of Alarm Sounds
3.3 Significance of alarm sounds 5. Communication Interface Port Significance Alarm Sounds The RACK-installed UPS has a standard DB-9 female serial port. This port provides several signals and their respective functions are given as follows: Battery mode (Power Mains failure) One beep every 10s Function Battery voltage low... -
Page 8: Electrical Specification
longer than 1.5s, this signal can no longer be canceled. Note – At a nominal line voltage of 127 VAC, the maximum AC input will be reached before 127 + 15% and the unit will go to battery mode before the bypass 3. -
Page 9: Internal Battery Pack
If you have any problems or questions with the UPS, call your local distributor or 50minutes < Discharging time 4Hrs, Orion Power Systems technical support at the following telephone number : Batt Vcutoff = 10V/pcs In the United States: 1-877-385-1654 4Hrs <...