Placing The System; Placing The Stand; System Connections - Sharp HT-SB602 Operation Manual

Placing the system

Installation image:
TV
Sound Bar
DVD player
VCR
Place the system as shown.
Remove the protective fi lm covering the sound bar and
subwoofer before turn on the system.

System connections

Make sure to unplug the AC power cord before making any connections.
Subwoofer
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Subwoofer
AC outlet
AC 120 V ~ 60 Hz
E-9
Notes:
 The front panel of the sound bar is not removable.
 The transmission distance of the wireless signal
between the subwoofer and sound bar is about 32
feet (10m), but may vary depending on your operating
environment. If a steel-concrete or metallic wall is
between the subwoofer and the sound bar, the system
may not operate at all, because the wireless signal
cannot penetrate metal.
Caution:
 Do not change the installation direction when the
sound bar is turned on.
 Do not stand or sit on the sound bar and subwoofer as
you may be injured.
 Do not allow any objects to fall into or to be placed in
the bass refl ex duct.
 Placing the stand
Place the stand as shown.
Stand
Sound Bar
AC outlet
AC 120 V ~ 60 Hz