Listening To Bluetooth Enabled Devices; Nfc Connection For Audio Playback; Pairing Bluetooth Devices - Sharp HT-SB602 Operation Manual

Bluetooth one touch connection via NFC (continued)
 NFC connection for audio playback
Check that:
 Your device (smartphone / tablet) has an NFC function.
 NFC function on your device is turned on.
 Screen lock function of the device is off.
 This unit is not in Eco mode.
1
Touch your device to the NFC detection area on the
subwoofer or supplied NFC tag.
NFC detection area
2
A pop-up window asking whether to proceed with the
Bluetooth connection appears on the device. Select
<YES>.
 The 'connected' message appears when the connec-
tion is complete.

Listening to Bluetooth enabled devices

 Bluetooth
Bluetooth wireless technology is a short-range radio
technology that enables wireless communication between
various types of digital devices, such as mobile phone or
computer. It operates within a range of about 10 meters (30
feet) without the hassle of having to use cables to connect
these devices.
This unit supports the following:
Communication System: Bluetooth Specifi cation version
2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profi le : A2DP (Advanced Audio Distribution Profi le)
and AVRCP (Audio/Video Remote Control Profi le)
Notes when using unit with a mobile phone
 This unit cannot be used to talk over the telephone even
when there is a Bluetooth connection made to a mobile
phone.
 Please refer to the operating manual supplied with the
mobile phone for details on operation of your mobile
phone while transmitting the sound using a Bluetooth
connection.
3
Playback will start automatically. Otherwise, press
play (on remote control or source device).
 Sound will be heard from the speakers of this unit via
audio streaming.
 Your device must be within 10 meters from the sound
bar.
Bluetooth operation buttons (remote control only)
Or
Notes:
 To disconnect, simply touch your device to the NFC
detection area on the subwoofer or NFC tag again.
NFC tag
 To listen to audio via Bluetooth connectivity without
NFC tag - refer "Pairing with other Bluetooth source
devices" on page 18.
 It takes about 6-8 seconds for a Bluetooth enabled device
(eg. smartphone) to establish Bluetooth connection with
this unit via NFC or manual connection.
 Pairing Bluetooth devices
Bluetooth devices need to be initially paired fi rst before they
can exchange data. Once paired, it is not necessary to pair
them again unless:
 Pairing is made with more than 8 devices. Pairing can
only be made one device at a time. This unit can be
paired to a maximum of 8 devices. If subsequent device
is paired, the oldest device paired, will be deleted and
replaced with the new one.
 This unit is reset. All pairing information is deleted when
unit is reset.
 Pairing information is deleted while re-pairing, etc.
E-17
Press the button to play or pause.
Press the button to skip up.
Press and hold to fast forward.
Press the button to skip down.
Press and hold to fast reverse.