Sharp HT-SB602 Operation Manual

Sound bar home theater system

Hide thumbs Also See for HT-SB602:

User manual

Operation manual (31 pages)

Quick start manual (2 pages)

Table Of Contents

Table of Contents

Quick Links

OPERATION MANUAL

Subwoofer Stand x 2

Audio Cable x 1

(GITAUA022AW01)

(QCNWGA108AWPZ)

Pattern Paper

(TCAUHA036AWZZ)

(GCASP8973AW01)

HDMI Cable x 1

(QCNWGA077AWPZ)

NFC tag x 1

Velcro tape (hook type) x 1

(PSHEZA373AW01)

ENGLISH

IR Transmitter x 1

(QCNWNC064AS01)

Velcro tape (loop type) x 2

(PSHEZA372AW01)

Printed in Malaysia

14A R AS

Table of Contents

Summary of Contents for Sharp HT-SB602

Page 1: Operation Manual
SOUND BAR HOME THEATER SYSTEM OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. HT-SB602 Sound Bar Home Theater system consisting of HT-SB602 (sound bar system) and CP-SW602 (active subwoofer system).
Page 2 Special Notes FCC Radiation Exposure Statement This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. It must not be co-located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions: CAUTION: TO REDUCE THE RISK OF ELECTRIC 1.
Page 3: Important Safety Instructions
Important Safety Instructions Electricity is used to perform many useful functions, but it 17) Object and Liquid Entry - Never push objects of any kind can also cause personal injuries and property damage if into this product through openings as they may touch improperly handled.
Page 4: For U.s. Customer Only
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.
Page 5: Volume Control
 This unit should only be used within the range of 41°F - 95°F (5°C - 35°C). 4" (10 cm) 4" (10 cm) 4" (10 cm)  SHARP is not responsible for damage due to improper use. Refer all servicing to a SHARP authorised service center. Warnings: 4"...
Page 6: Sound Bar Rear Panel
Controls and indicators (continued)  Display  Subwoofer REAR VIEW FRONT VIEW DIGITAL DIGITAL 1. Dolby Digital Indicator 1. NFC detection area 2. DTS Indicator 2. Power/Pairing Indicator 3. Muting Indicator 3. Bass Reﬂ ect Duct 4. Woofer 5. SW LINK (Subwoofer Link) button 6.
Page 7 TV and Down down the TV Buttons channels. Buttons volume. Press the Press the AV Mode MUTE Button button to button to Button switch AV mute the mode. TV volume. Note: Some models of SHARP TV may not be operable.
Page 8: Sound Bar Preparation
 Driving screws  Installing the sound bar SHARP designed the sound bar so you may hang them on the wall. Use proper screws (not supplied). See below Align the wall mount slot at the sound bar to the for size and type.
Page 9: Falling Prevention
Falling prevention  Safety wires (not supplied) are useful to prevent the sound bar from falling off.  2 persons are required to perform this procedure. When mounting on the wall Loop the safety wires (not supplied) into each Align and ﬁ x the sound bar to wall mount angle. hole of the wall mount angle as shown.
Page 10: Placing The System
Placing the system Installation image: Notes:  The front panel of the sound bar is not removable.  The transmission distance of the wireless signal between the subwoofer and sound bar is about 32 feet (10m), but may vary depending on your operating environment.
Page 11: Ir (Infrared) Transmitter Connection
System connections (continued)  IR (Infrared) transmitter connection If the TV’s remote sensor is blocked by the sound bar, use the IR transmitter to relay the signal to the TV. 1. Connect the IR transmitter to IR out terminal to allow the TV’s remote signal to pass through. 2.
Page 12: Audio Connections To Tvs, Dvd Players, Vcrs, Etc
For details, refer to the operation manual of the TV.  If you are unable to select external speaker setting from the TV menu (E.g. For SHARP LCD TV, it is named as AQUOS AUDIO SP), turn the CEC OFF and ON again.
Page 13: Remote Control
Audio connections to TVs, DVD players, VCRs, etc. (continued)  Connecting a TV, or DVD player, etc. Connect to the TV using an optical digital cable or an audio cable. To audio output terminals HEADPHONE terminal Blu-Ray/ To optical DVD player/Digital digital audio Tuner output...
Page 14: General Control
 To get the optimum listening performance, make sure  “AQUOS speaker is enabled” message will be the area around the sound bar and subwoofer is clear displayed if SHARP LCD TV does not detect HT-SB602 of any obstacles. during power on. However the message “AQUOS audio with AQUOS LINK is enabled”...
Page 15: Subwoofer Level Control
General control (continued)  Display brightness control  Bass and Treble Control Press the DIMMER button to adjust the brightness of the Bass and Treble control is applicable during BYPASS display. mode only. Bass Control DIMMER 1 (Display is dim) 1.
Page 16 General control (continued) 3D AUDIO 1 : Sound effect that emphasizes 3D  APC (Auto Power Off Control) sound. This sound bar can be set to turn off automatically if no signal is detected. (During Audio In and Optical In function) 3D AUDIO 2 : Sound effect that maintains the 3D 1.
Page 17: Bluetooth One Touch Connection Via Nfc
 NFC tag provided has unique ID for each sound bar. and stick it to the rear of the NFC tag. Then place  SHARP will not be held liable for the damages caused the tag onto the desired location.
Page 18: Listening To Bluetooth Enabled Devices
Bluetooth one touch connection via NFC (continued) Playback will start automatically. Otherwise, press  NFC connection for audio playback play (on remote control or source device). Check that:  Sound will be heard from the speakers of this unit via ...
Page 19: Listening To The Sound
Start the Bluetooth connection from the Bluetooth Perform pairing procedure on the source device to stereo audio source device. detect this unit. “HT-SB602 SHARP” will appear in the detected devices list (if available) in the source Press the Bluetooth / button.
Page 20: Operating The Tv With The Remote Control
Many potential problems can be resolved by the owner without calling a service technician. You can operate Sharp TVs with this system’s remote If something is wrong with this product, check the following control. before calling your authorized SHARP dealer or service center.
Page 21: Factory Reset, Clearing All Memory
Troubleshooting chart (continued) Symptom Possible cause  If problem occurs during operation  Wireless  Make sure there is no obstacles When this product is subject to strong external interference connection cannot (especially metal) blocking (mechanical shock, excessive static electricity, abnormal be established.
Page 22: Error Indicators And Warnings
Speciﬁ cations Output power RMS: 150 watts per channel into 3 ohms As part of our policy of continuous improvement, SHARP at 100 Hz, 10% total harmonic reserves the right to make design and speciﬁ cation distortion changes for product improvement without prior notice.

Sharp HT-SB602 Operation Manual

Quick Links

OPERATION MANUAL

Related Manuals for Sharp HT-SB602

Summary of Contents for Sharp HT-SB602

Table of Contents