System Connections - Sharp XL-E75H Operation Manual

System connections

Make sure to unplug the AC power lead before making any connections.
FM aerial
(commercially
available)
To audio input
socket
(not supplied)
To component
video input
sockets
(supplied)
To video
input socket
(not supplied)
To HDMI
input socket
To S-video input socket
To coaxial digital audio input socket
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM ANTENNA 75 OHMS socket
and position the FM aerial wire in the direction where the strongest
signal can be received.
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
P P R
B
(commercially
available)
(commercially
available)
To audio output sockets
Right speaker
75 ohms
coaxial cable
External FM aerial
(commercially
available)
External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
E-6
(not supplied)
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
Red Black
Left speaker
To SCART
input socket