Error And Maintenance Messages - Brother MFC-J460DW Online User's Manual

Home > Troubleshooting

Error and Maintenance Messages

As with any sophisticated office product, errors may occur and supply items may have to be replaced. If this
happens, your machine identifies the error or required routine maintenance and shows the appropriate message.
The most common error and maintenance messages are shown in the table.
You can correct most errors and perform routine maintenance yourself. If you need more tips, go to your model's
FAQs & Troubleshooting page on the Brother Solutions Center at http://support.brother.com.
• (MFC-J880DW/MFC-J885DW)
If the Touchscreen displays errors and your Android
device to the NFC logo on the control panel to access the Brother Solutions Center and browse the
latest FAQs from your device. (Your mobile telephone provider's message and data rates may apply.)
Make sure the NFC settings of both your Brother machine and your Android
• Related Information references are at the bottom of this page.
MFC-J460DW/MFC-J480DW/MFC-J485DW
Error Message
A device is already
connected. Press OK.
(Wi-Fi Direct)
Absorber NearFull
B&W Print Only
Replace Ink
> Error and Maintenance Messages
Cause
Two mobile devices are already
connected to the Wi-Fi Direct network
when the Brother machine is the Group
Owner (G/O).
The ink absorber box or flushing box is
nearly full.
One or more of the color ink cartridges
have reached the end of their lives.
You can use the machine in black & white
mode for approximately four weeks
depending on the number of pages you
print.
While this message appears on the LCD,
each operation works in the following way:
• Printing
If the media type is set to Plain Paper
in the Basic tab, and Grayscale is
chosen in the Advanced tab of the
printer driver, you can use the machine
as a black & white printer.
2-sided print is not available when this
message appears.
• Copying
If the paper type is set to Plain
Paper, you can make copies in black
& white.
2-sided copy is not available when this
message appears.
• Faxing
If the paper type is set to Plain
Paper or Inkjet Paper, the
machine will receive and print the
faxes in black & white.
™
device supports the NFC feature, touch your
Action
After the current connection between your
Brother machine and another mobile
device has shut down, try to configure the
Wi-Fi Direct settings again. You can
confirm the connection status by printing
the Network Configuration Report.
The ink absorber box or flushing box must
be replaced soon. Call Brother Customer
Service or a Brother Authorized Service
Center to have your machine serviced.
Replace the ink cartridges.
See Related Information: Replace the Ink
Cartridges.
Although the Cause column lists options
for using the machine after this error
appears, you will not be able to use the
machine until you replace the ink
cartridge(s) under the following
conditions:
• If you unplug the machine or take out
the ink cartridge.
• (Windows
Paper in the Basic tab of the printer
driver.
(Macintosh) If you select Slow Drying
Paper in the Print Settings drop-
down list of the printer driver.
™
device are set to On.
®
) If you select Slow Drying
449