Running A Product Check - Epson XP-320 User Manual

LCD code
I-60
Recovery mode
Note: The ink pads in the printer collect, distribute, and contain the ink that is not used on printed pages.
During the life of your product it may reach a condition where either satisfactory print quality cannot be
maintained or the ink pads have reached the end of their usable life. The Epson Status Monitor, your
LCD, or lights on the control panel will advise you when these parts need replacing. If this happens
during the standard warranty of the product, the exchange of the product or replacement of the pads is
covered under the standard warranty. If the product is out of warranty, the pads can be replaced by any
Epson authorized service provider. The waste ink pads are not a user-replaceable part.
Parent topic:
Related concepts
Check Cartridge Status
Related references
Paper Jam Problems
Where to Get Help
Related topics
Replacing Ink Cartridges
Printing with Black Ink and Expended Color Cartridges
Loading Paper

Running a Product Check

Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load plain paper in the product.
3. Press the
4. Press the arrow buttons to select Setup and press the OK button.
Condition/solution
Your computer may not support WSD (Web Services for Devices). The Scan to
PC (WSD) function is available only for computers running English versions of
Windows 8.x, Windows 7, or Windows Vista.
An error has occurred during firmware updating. Connect your product using a
USB cable and try updating the firmware again. If you still receive this error
message, contact Epson for support.
Solving Problems
home button, if necessary.
203