Toshiba e-studio2555c Quick Start Manual page 74

Chapter 6 INFORMATION ABOUT EQUIPMENT
e-STUDIO2555C/3055C/3555C/4555C/5055C,
e-STUDIO2555CSE/3055CSE/3555CSE/4555CSE/5055CSE Specifications
Model name
Type
Original glass
Printing (copying) system
Developing system
Fixing method
Photosensor type
Original scanning system
Original scanning sensor
Scanning light source
Scanning
Resolution
Writing
Acceptable originals
Acceptable original size
Drawer
Acceptable copy
paper size
Bypass
Drawer
Acceptable copy
paper weight
Bypass
Warm-up time
Black-and-white
First copy time
(A4 or LT
portrait)
Color
Continuous copy speed
Multiple copying
Black-and-white
Excluded image
Color
width
*2
Printer (Black-
and-white/Color)
Actual size
Reproduction
ratio
Zoom
Drawer
Paper supply
Bypass
Exit tray loading capacity
Toner density adjustment
Exposure control
USB interface
Environment (for normal use)
Power requirements and Power
consumption
(including optional equipments)
Dimensions (equipment only)
Weight
Space occupied (equipment only)
Storage capacity
• This specification varies depending on the printing conditions and the environment.
• Specifications and appearance are subject to change without notice in the interest of product improvement.
*1 Sheets of paper longer than 461 mm (18.15") are printed in 300 dpi resolution.
*2 When the paper size is A3/LD or smaller.
72
FC-2555C/FC-3055C/FC-3555C/FC-4555C/FC-5055C
Desktop type
Fixed
Indirect electrophotographic method
2-component magnetic brush developing
External IH belt fusing
OPC
Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning system by
feeding the original)
Linear CCD sensor
LED
600 dpi x 600 dpi
Color and black-and-white (grayscale): 600 dpi x 600 dpi, 5 bits
Sheets, books
Max. A3 or LD
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 305 mm x 457 mm, 320 mm x 450 mm, 320 mm x 460
mm, LD, LG, LT, LT-R, ST-R, COMP, 13"LG, 8.5" SQ, 12" x 18", 8K, 16K, 16K-R
Paper size within 100 - 320 mm (5.5" - 12.6") (length), 148 - 460 mm (8.5" - 18.1") (width)
(For printing functions, within 461 - 1200 mm (18.15" - 47.24") (length)
60 - 256 g/m (16 lb. Bond - 80 lb. Cover (140 lb. Index))
2
Single paper feed: 52 - 280 g/m
Continuous paper feed: 60 - 280 g/m
Approx. 27 seconds
e-STUDIO2555C/3055C/3555C, e-STUDIO2555CSE/3055CSE/3555CSE: 6.4 seconds
e-STUDIO4555C/5055C, e-STUDIO4555CSE/5055CSE: 4.7 seconds
e-STUDIO2555C/3055C/3555C, e-STUDIO2555CSE/3055CSE/3555CSE: 8.1 seconds
e-STUDIO4555C/5055C, e-STUDIO4555CSE/5055CSE: 6.1 seconds
Refer to the Copying Guide.
Up to 999 sheets (digital key entry)
Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17" + 0.11" - 0.05"),
Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
Both edges: 2.0±2.0 mm (0.08"±0.08")
Leading edge: 5.0 mm ± 2.0 mm (0.20"±0.08"),
Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
Both edges: 2.0±2.0 mm (0.08"±0.08")
Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17" + 0.11" - 0.05"),
Trailing edge: 4.2 mm +1.2 mm - 2.8 mm (0.17" + 0.05" - 0.11"),
Both edges: 4.2±2.0 mm (0.17"±0.08")
100±0.5%
25 - 400% (in 1% increments)
For the Reversing Automatic Document Feeder 25 - 200% (in 1% increments)
Approx. 550 sheets (80 g/m , 20 lb. Bond)
2
Approx. 100 sheets (80 g/m , 20 lb. Bond)
2
Approx. 400 sheets (80 g/m , 20 lb. Bond)
2
Magnetic auto-toner system + Pixel count system
Automatic plus manual selection from 11 exposure step
USB 2.0 (Hi-Speed)
Temperature: 10 - 30 °C (50 - 86 °F), Humidity: 20 - 85% (No Condensation)
AC 220-240 V±10%, 8 A (50/60 Hz): 1.6 kW or less
AC 120 V±10%, 12 A (50/60 Hz): 1.5 kW or less
585 mm (23.0") (W) x 644 mm (25.4") (D) x 787 mm (31.0") (H) (At 90 degrees of the control
panel angle)
585 mm (23.0") (W) x 762 mm (30.0") (D) x 787 mm (31.0") (H) (At 7 degrees of the control
panel angle)
Approx. 75 kg (165.3 lb.) (equipment including developer and drum)
981 mm (38.6") (W) x 806 mm (31.7") (D) (At 7 degrees of the control panel angle)
Max. 1000 sheets or until the memory is full (Toshiba's own chart)
(14 lb. Bond - 100 lb. Cover (150 lb. Index))
2
(16 lb. Bond - 100 lb. Cover (150 lb. Index))
2
*1 )