Ptt Call To A Single Device - AT&T CL82115 User Manual

Multiple handset use
Push-to-talk (PTT)

PTT call to a single device

1. There are a few ways to begin a PTT call to a
single device. When the handset is not in use:
• If you have a two-handset system,
press and hold PUSH TO TAL�.
• If you have more than two handsets:
w Press PUSH TO TAL� on the handset, then
use the dialing keys to enter the destination
device number.
-OR-
w Press PUSH TO TAL� on the handset. Press
q or p
CID
device number, then press
PUSH TO TAL�.
The handset shows Connecting to HANDSET
X... (HANDSET represents the handset name, X represents the
destination handset number). When the connection is made, both
your and the destination device screens display
Press and hold [PTT] to talk.
2. Press and hold PUSH TO TAL�. A chirp indicates
your microphone is on. Speak towards the device.
Your voice is broadcast to the destination device.
While you are speaking, your handset shows
PTT To handset: X.
3. Release PUSH TO TAL� after speaking. Both devices beep once
again and the screens show Press and hold [PTT] to talk, then
you can press and hold PUSH TO TAL� to continue speaking or
the destination device can respond (see Answer a PTT call on
page 43).
4. To end the PTT call, press
in the telephone base or charger. The handset shows
Push to talk Ended.
to highlight the destination
DIR
/SELECT or
MENU
or place the handset
41
PUSH TO TALK
>HANDSET X
Connecting to
HANDSET X...
Press and hold
[PTT] to talk
PTT To
handset: X