Push-To-Talk (Ptt); Turn Ptt On Or Off; Ptt Call To A Single Device - AT&T CL84102 User Manual

Dect 6.0 corded/cordless telephone/answering system with caller id/call waiting
Hide thumbs Also See for CL84102:
Table of Contents

Advertisement

Multiple handset use

Push-to-talk (PTT)

You can directly broadcast messages to the speakerphone of
any device. Press and hold �U�H TO TAL� on a handset or �TT
on the telephone base to begin two-way communication.
Only one device can talk at a time. While talking to another
device, press and hold �U�H TO TAL� on the handset or
�TT on the telephone base.
You must release �U�H TO TAL� on the handset or �TT
on the telephone base, so the other person can respond.
Only one PTT session can be active at a time.
While PTT is in use between two devices, other devices
cannot use the intercom feature but can access the
answering system.
When you attempt to place a PTT call to another device which is accessing
the answering system or on an intercom call or outside call, your device
screen shows Not available at this time.
Turn �TT on or off
Using a cordless handset or the telephone base:
1. Press �U�H TO TAL� on the handset or �TT on the base when in idle
mode. The �U�H TO TAL� menu displays.
2. Press q
or p
CID
3. Press q
or p
CID
�TT call to a single device
Using a cordless handset:
1. When the handset is not in use:
If you have one handset, press and hold �U�H TO TAL�.
If you have more than one handset. Press �U�H TO TAL� on the
handset. Press q
Then press
The handset shows Connecting to HAND�ET X... (HAND�ET represents
the handset name, X represents the destination handset number) or
Connecting to BA�E 0...
seconds. When the connection is made, both your and the destination
device screens display �ress and hold [�TT] to talk.
2. Press and hold �U�H TO TAL�. A chirp indicates your microphone is on.
Speak towards the device. Your voice is broadcast to the destination device.
While you speak, your handset shows �TT To handset: X or �TT To base.
to highlight >�TT On/Off, then press
DIR
to choose >On or >Off, then press
DIR
or p
CID
DIR
/�ELECT or �U�H TO TAL�.
MENU
(BA�E represents the base name)
to highlight the destination device number.
23
�TT
/�ELECT.
MENU
/�ELECT.
MENU
for a few

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl84342Cl84352Cl84152Cl84202Cl84252

Table of Contents