Laser Scanner Assembly - Canon GP215 Service Manual

4. MECHANICAL SYSTEM
4) Remove the screw, an remove the original
size sensor r; then, remove the flat cable
and all connectors to the IP PCB t.
4
Figure 4-511
5) Remove the four screws, and remove the PI
PCB.
4–30
COPYRIGHT © 1996 CANON INC.
5
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
D. Laser Scanner Assembly
1. Removing the Scanner Cooling
Fan Duct 1
1) Remove the four screws, and remove the rear
cover.
2) Remove the scanner cooling fan.
3) Remove the three screws, and remove the fly-
wheel.
4) Remove the cable guide by disengaging the
hook assembly.
5) Remove the two screws w, and remove the
scanner cooing fan duct 1 q by sliding it to
the left.
1
2
Figure 4-512
2. Removing the Laser Scanner Unit
1) Remove the rear cover, and remove the scan-
ner cooling fan duct.
2) Remove the copyboard glass, CCD unit cover,
IP cover, and IP PCB.
3) Remove the fan duct 2 q by sliding it to the
rear.
2