Pick-Up Drive Assembly - Canon GP215 Service Manual

E. Pick-Up Drive Assembly
1. Removing the Main Motor
1) Disconnect the power plug, and remove the
following:
• Rear cover (4 screws)
• Flywheel (3 screws)
2) Remove the four screws w, and disconnect
the two connectors e; then, remove the main
motor q.
2 1
2
Figure 4-315
COPYRIGHT © 1996 CANON INC.
2
3
2
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
2. Removing the Pick-Up drive Unit
1) Disconnect the power plug, and remove the
following:
• Rear cover (4 screws)
• Flywheel (3 screws)
• Scanner cooling fan (hook, connector)
2) Remove the pick-up unit. (See p. 4-13.)
3) Release the belt q.
1
Figure 4-316
4) Remove the harness retainer w, two high-
voltage cable e, and power supply cord
mount r (2 screws).
2
3
2
Figure 4-317
4 3
4–15