4. MECHANICAL SYSTEM
C. Control Panel
1. Control Panel
1) Remove the inside cover.
2) Remove the screw, and disconnect the
RS232C connector.
3) Remove the screw w, and remove the fixing
controller PCB q.
1
2
Figure 4-211
4–6
COPYRIGHT © 1996 CANON INC.
4) Remove the screw, and remove the magnet
plate from the top of the control panel.
5) Remove the four screws r, and remove and
turn over the control panel e.
Caution:
Pay attention to the four connectors con-
nected to the control panel when removing
and turning over the control panel.
6) Disconnect the four connectors.
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3
4
Figure 4-212