Ccd Unit - Canon GP215 Service Manual

4. MECHANICAL SYSTEM
Caution:
The scanning lamp has its own orientation.
Observe the following when installing it:
1. Make sure that the manufacturer's name
is toward the rear of the machine.
2. Keep the transparent side of the lamp
toward the reflecting plate.
3. Do not touch the transparent side of the
lamp.
Figure 4-505
8) Execute 'R&D SHADING' (12th screen) in
service mode (*3*; ADJUST). (shading for
R&D and factory)
4–28
COPYRIGHT © 1996 CANON INC.
Transparent side of
the lamp
Reflecting plate
B. CCD Unit
1. Removing the CCD Unit
1) Disconnect the power plug.
2) Remove the copyboard glass.
3) Remove the CCD unit cover q.
4) Remove the screw, and remove the original
size sensor w to keep it away from the CCD
unit.
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
1
Figure 4-506
2
Figure 4-507