Sony RCD-W222ES Service Manual page 48

RCD-W222ES
5-2. Playback Check using TCD-W032W
1) Install the CDM65 in the equipment and install the TCD-W032W in Deck B.
2) Rotate the l AMS L (Deck B) knob to select the track 16. Start playback by pressing the same knob or by pressing the H
(Deck B) button.
3) Perform playback for 10 seconds or more and confirm that there is no abnormality such as sound skipping and others.
5-3. Updating the RID Code
When the IC501 firmware is upgraded, the following operation may be required.
1) Select the menu as follows. Control → Macro, and select
RIDupdate.ttl.
Press "Open". (See Fig. 5-4, 5-5)
2) Press the "RESET" button (SW101) of the jig as prompted by the display.
3) Check that the message "completed!" appears.
48
4 Fig. 5-4
4 Fig. 5-5