Sony RCD-W222ES Service Manual page 18

RCD-W222ES
3. Press the MENU/NO button, then "LED CHECK" is displayed
again.
4. To exit from this mode, turn the l AMS L (DECK B)
knob to display "Ship Mode", and press the l AMS L
(DECK B) knob to execute the Ship Mode.
5. Press the POWER button to POWER off.
KEY Check Mode
Procedure:
1. Enter the test mode, then turn the l AMS L (DECK B)
knob to display "KEY CHECK", and press the l AMS L
(DECK B) knob.
2. "Got l keys" is displayed.
3. Press the buttons, and when all the buttons are pressed (without
the POWER button), "Got 35 keys" will be displayed.
4. To exit from this mode, press the l AMS L (DECK A),
[SBM] and l AMS L (DECK B) buttons in order with-
out releasing the button.
5. Press the POWER button to POWER off.
Remote Commander Check
Procedure:
1. Enter the test mode, then turn the l AMS L (DECK B)
knob to display "RM CHECK", and press the l AMS L
(DECK B) knob.
2. Press the H key on the remote commander, then "Got
PlayCom" is displayed.
3. Press the MENU/NO button, then "RM CHECK" is displayed again.
4. To exit from this mode, turn the l AMS L (DECK B)
knob to display "Ship Mode", and press the l AMS L
(DECK B) knob to execute the Ship Mode.
5. Press the POWER button to POWER off.
CDR History Display
Procedure:
1. Enter the test mode, then turn the l AMS L (DECK B)
knob to display "CDR History", and press the l AMS L
(DECK B) knob.
2. "00 ######## ########" is displayed as the first error hitory.
3. Turn the l AMS L (DECK B) knob to select the error
history. The number of error histories is ten in all.
(Refer to "Contents of CDR error history".)
4. Press the MENU/NO button, then "CDR History" is displayed
again.
5. To exit from this mode, turn the l AMS L (DECK B)
knob to display "Ship Mode", and press the l AMS L
(DECK B) knob to execute the Ship Mode.
6. Press the POWER button to POWER off.
Play Speed Selection Mode (Deck A)
Procedure:
1. Enter the test mode, then turn the l AMS L (DECK B)
knob to display "Play Speed", and press the l AMS L
(DECK B) knob.
2. "x4 Play" is displayed. If a CD is in the deck A, pressing the
N button executes the 4 times speed playback.
3. Press the x button to stop the playback.
4. Press the MENU/NO button, then "Play Speed" is displayed
again.
5. To exit from this mode, turn the l AMS L (DECK B)
knob to display "Ship Mode", and press the l AMS L
(DECK B) knob to execute the Ship Mode.
6. Press the POWER button to POWER off.
18
Contents of CDR error history
display(example)
1 2
00 05070D80
000E2E0D
5
(hexadecimal)
1 Order of the error history
00 to 09: ten error histories in all
2 Error contents
01: unable to focus on
02: Q code/ATIP discontinuous (several frames preceding)
03: Q code/ATIP unreadable
04: search taking more than sixteen seconds
05: focus failure
06: sled over run
07: not passing by start time to write
08: audio buffer over
09: sync failure
example : 05 is focus failure
3 Operation mode
bit 7: Speed
0: normal speed
1: x4 speed
bit 6 to bit 0: Number of inner condition
01: POWER off condition/during shift to POWER on
02: POWER off and shipment setting/during shift to POWER
off and shipment setting
03: stop condition/during stop
04: during start up of servo
05: during TOC reading and others
06: during CD TEXT reading
07: during standby(waiting for command from the CD sys-
tem)/during search
08: during playback
09: during manual search(playback)
0A:during pause
0B: during manual search(pause)
0C: during OPC
0D:recording standby/during recording pause
(enable to shift to recording)
0E: during recording
0F: unable to record (waiting for shift to being recordable)
10: PMA updating
11: during operation of unfinalize
12: during operation of finalize
13: PMA erasing
14: emergency
15: recording preparation
16: recording end
3 4
6