Grounding Instructions - Windsor CMPS2 Operating Instructions Manual

THIS PRODUCT IS FOR COMMERCIAL
USE ONLY.
Electrical
The amp, hertz, and voltage are listed on the data label
found on each machine. Using voltages above or below
those indicated on the data label will cause serious
damage to the motors.
Extension cords
If an extension cord is used, the wire size must be at
least one size larger than the power cord on the
machine, and must be limited to 50 feet (15.5m) in
length.

Grounding Instructions:

This appliance must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of
electric shock. This appliance is equipped with a cord
having an equipment-grounding conductor and
grounding plug. The plug must be inserted into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordi-
nances.
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check
with a qualified electrician or service person if you are
in doubt as to whether the outlet is properly grounded.
Do not modify the plug provided with the appliance - if it
will not fit the outlet, have a proper outlet installed by a
qualified electrician.
86398820 Operator Manual CMPS2
Grounding Instructions (120V ONLY)
Grounding Pin
GROUNDING CONNECTION
USING AN ADAPTOR
Grounded
Outlet
FIGURE A
Adaptor
Tab for Grounding
Screw
FIGURE C
Note: Adaptors are not allowed in Canada.
Ground-Fault Circuit-Interrupter
Protection (120V ONLY)
This pressure washer is provided with a (GFCI) built
into the plug of the power supply cord. This device
provides additional protection from the risk of electric
shock. Should replacement of the plug or cord become
necessary, use only identical replacement parts that
include GFCI protection. If the GFCI is not the
AUTOMATIC RESET TYPE, it must be manually
TESTED and RESET each time the cleaning system is
plugged in. Press firmly to assure internal spring
activates switch. Push "test" then push "reset". Motor
will not start if GFCl does not reset. Check circuit
breakers or outlet. If circuit breaker is not tripped and
unit will not reset, contact local service center.
Safety
Grounded
Outlet Box
Adaptor
Metal Screw
FIGURE B
9