Mercedes-Benz G-Class Operator's Manual page 182

Driving systems
180
Switching on while stationary
This function may be useful if you want to
keep up with the traffic flow, e.g. at the end
of a tailback.
You can only activate DISTRONIC PLUS if:
the vehicle in front and
R
your vehicle are stationary
R
Briefly pull the cruise control lever towards
X
you ?, or press it up : or down A.
DISTRONIC PLUS is selected.
i
DISTRONIC PLUS can be activated at a
standstill at under 20 mph (30 km/h) only
if a vehicle in front has been detected.
Therefore, the DISTRONIC PLUS distance
display in the instrument cluster should be
activated ( page 213).
Y
Keep the cruise control lever pressed
X
up : or down A until the desired speed
is set.
i
You can use the cruise control lever to set
the stored speed and the control on the
cruise control lever to set the specified
minimum distance (
Activating at the current speed/last
stored speed
G
WARNING
If you call up the stored speed and it differs
from the current speed, the vehicle
accelerates or decelerates. If you do not know
the stored speed, the vehicle could accelerate
or brake unexpectedly. There is a risk of an
accident.
Pay attention to the road and traffic
conditions before calling up the stored speed.
If you do not know the stored speed, store the
desired speed again.
Briefly pull the cruise control lever towards
X
you ?.
Remove your foot from the accelerator
X
pedal.
DISTRONIC PLUS is activated. The first
time it is activated, the current speed is
page 183).
Y
stored. Otherwise, it sets the vehicle cruise
speed to the previously stored value.
Driving with DISTRONIC PLUS
Pulling away and driving
If the vehicle in front pulls away: remove
X
your foot from the brake pedal.
Briefly pull the cruise control lever towards
X
you ?, or press it up : or down A.
or
Accelerate briefly.
X
Your vehicle pulls away and adapts its
speed to that of the vehicle in front.
If there is no vehicle in front, DISTRONIC
PLUS operates in the same way as cruise
control.
If DISTRONIC PLUS detects that the vehicle
in front has slowed down, it brakes your
vehicle. In this way, the distance you have
selected is maintained.
If DISTRONIC PLUS detects that the vehicle
in front is driving faster, it accelerates your
vehicle, but only up to the speed you have
stored.
If you depress the brake, DISTRONIC PLUS is
deactivated unless your vehicle is stationary.