Side Marker Lamps - Mercedes-Benz G-Class Operator's Manual

Replacing bulbs
112
Turn bulb A counter-clockwise, applying
X
slight pressure, and remove it from the bulb
holder.
Insert the new bulb into the bulb holder and
X
turn it clockwise until it engages.
Install lens ?.
X
Replace and tighten screws =.
X
AMG vehicles: fold down protection
X
grille : and allow it to engage in
mounting ;.

Side marker lamps

! Do not fasten the screws too tightly. You
could otherwise damage the lens.
Front side marker lamp (example)
The bulbs of the front and rear side marker
lamps are changed in the same way.
Switch off the lights.
X
Unscrew screws :.
X
Remove housing ;.
X
Remove dust cover =.
X
Push the catch to the side and pull the bulb
X
holder with the bulb out of housing ;.
Lightly press bulb ?, turn it counter-
X
clockwise and pull it out.
Insert the new bulb and, applying slight
X
pressure, turn it clockwise until it engages.
Insert the bulb holder into housing ;.
X
Attach dust cover =.
X
Insert housing ;.
X
Replace and tighten screws :.
X
Changing the rear bulbs
G 55 AMG only: protective grille
! Make sure that the protective grille does
not hit any painted surfaces.
You could otherwise damage the
paintwork.
Protection grille (AMG vehicles)
You must remove the protective grille before
you can change the bulbs in the tail lamps.