Asus Maximus VIII Hero User Manual page 94

CPU Graphics [Auto]
The switching frequency will affect the GT transient response speed and the
component thermal production.
Configuration options: [Auto] [Manual]
DO NOT remove the thermal module. The thermal conditions should be monitored.
The following item appears only when you set the CPU Graphics to [Manual].
GT Power Phase Control [Auto]
This item allows you to set the power phase control of the GT.
Configuration options: [Auto] [Standard] [Optimized] [Extreme] [Power Phase
Response]
DO NOT remove the thermal module when setting this item to [Power Phase Response]
[Extreme]
or
DRAM Current Capability [100%]
This item provides a total power range for DRAM overclocking. A higher value setting
provides higher power consumption delivery and extends the overclocking frequency
range simultaneously.
Configuration options: [100%] [110%] [120%] [130%]
Configure higher values when overclocking or under a high CPU loading for extra power
support.
DRAM Power Phase Control [Extreme]
This item allows you to set the power phase control of the DRAM.
Configuration options: [Standard] [Optimized] [Extreme]
DRAM Switching Frequency [Auto]
This item affects the VRM transient response speed and the component thermal
production. Select [Manual] to configure a higher frequency for a quicker transient
response speed.
Configuration options: [Auto] [Manual]
3-18
CPU Graphics Frequency (KHz) [500]
This item allows you to set a higher frequency for a quicker transient
response speed. Use the <+> or <-> to adjust the value. The values range
from 300 KHz to 600 KHz with an interval of 50 KHz.
. The thermal conditions should be monitored.
Chapter 3: BIOS Setup