Asus Maximus VIII Hero User Manual page 46

Q-Code table
Code Description
Clean-up of NVRAM
B6
B7 Configuration Reset (reset of NVRAM settings)
Reserved for future AMI codes
B8– BF
CPU initialization error
D0
System Agent initialization error
D1
PCH initialization error
D2
Some of the Architectural Protocols are not available
D3
PCI resource allocation error. Out of Resources
D4
D5 No Space for Legacy Option ROM
No Console Output Devices are found
D6
No Console Input Devices are found
D7
Invalid password
D8
Error loading Boot Option (LoadImage returned error)
D9
Boot Option is failed (StartImage returned error)
DA
Flash update is failed
DB
Reset protocol is not available
DC
ACPI/ASL Checkpoints
Code Description
System is entering S1 sleep state
0x01
System is entering S2 sleep state
0x02
System is entering S3 sleep state
0x03
0x04 System is entering S4 sleep state
0x05 System is entering S5 sleep state
0x10 System is waking up from the S1 sleep state
System is waking up from the S2 sleep state
0x20
System is waking up from the S3 sleep state
0x30
System is waking up from the S4 sleep state
0x40
System has transitioned into ACPI mode. Interrupt controller is in PIC mode.
0xAC
System has transitioned into ACPI mode. Interrupt controller is in APIC mode.
0xAA
1-30
Chapter 1: Product Introduction