Table of Contents
Advertisement
protection for the rest of the network, and sending all incoming data to a particular IP
address.
To enable DMZ and designate a computer to screen incoming traffic:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Enter http://m.home or http://192.168.1.1.
A login screen displays.
3.
Enter the administrator login password.
The default password is admin. The password is case-sensitive.
4.
Select Settings > Router > Basic.
5.
In the DMZ section, select the On radio button next to DMZ Enabled.
6.
In the DMZ Address field, enter the IP address of the computer to which you want all data
sent. If the hotspot is tethered using a USB cable, this address is 192.168.1.4. If the hotspot
is connected using Wi-Fi, the first Wi-Fi client's IP address is usually 192.168.1.74.
The Submit button displays after you make a selection.
7.
Click the Submit button.
Telstra Pre-Paid 4G My Pocket Wi-Fi Ultimate
Advanced Settings
53
Advertisement
Table of Contents
