Furuno TZTL12F Installation Manual page 48

3. HOW TO SET UP THE EQUIPMENT
Menu item
[Transducer Power LF]
[Band Width (LF)]
Menu item
[High Frequency]
[Transducer Power HF]
[Low Frequency]
[Transducer Power LF]
3-14
Set the transmission power for low frequency.
Note 1: This menu item is available only for
DFF1, DFF1-UHD, BBDS1 and internal fish
finder users.
Note 2: For DDF1-UHD users, when the con-
nected transducer TDID is not supported by the
DFF1-UHD, the setting is fixed as [1000].
Set the bandwidth for low frequency.
Note: This item is only available for DFF3
users.
When [Transducer Setup Type] is set to [TDID]
Set the frequency (kHz) for the high frequency transducer.
Note: This item is displayed when the connected transducer has
an unsupported TDID.
Set the transmission power for high frequency.
Note 1: This item is only available for DFF1,
DFF1-UHD, BBDS1 and internal fish finder
users.
Note 2: For DDF1-UHD users, when the con-
nected transducer TDID is not supported by
the DFF1-UHD, the setting is fixed as [1000].
Set the frequency (kHz) for the low frequency transducer.
Note: This item is displayed when the connected transducer has
an unsupported TDID.
Set the transmission power for low frequency.
Note 1: This item is only available for DFF1,
DFF1-UHD, BBDS1 and internal fish finder
users.
Note 2: For DDF1-UHD users, when the con-
nected transducer TDID is not supported by
the DFF1-UHD, the setting is fixed as [1000].
Description
Description
Options
(setting range)
[600], [1000]
[10] to [100]
Options
(setting range)
[600], [1000]
[600], [1000]