Security Level; Data Security - Kyocera ECOSYS P6130cdn Operation Manual

Setup and Registration (System Menu) > System Menu

Security Level

[Menu] key > [▲] [▼] key > [Security] > [►] key > [▲] [▼] key > [Security Level] > [OK] key
Item
Security Level

Data Security

[Menu] key > [▲] [▼] key > [Security] > [►] key > [▲] [▼] key > [Data Security] > [►] key
Configure settings for data stored in the machine's memory.
Item
DataSanitization
SSD Initializ.
[Menu] key > [▲] [▼] key > [Security] > [►] key > [▲] [▼] key > [SSD Initializ.] > [►] key
Item
SSD Initializ.
Specify the security level.
Value:
Very High: In addition to [High] setting, this setting disables the machine settings to be
changed from external command.
High: This is the security setting we recommend. Use this setting normally.
Low: This mode is used during maintenance. Do not use normally.
Return the following information registered in the machine to the factory defaults.
• System settings
• Data saved in Custom Box
• Optional applications
IMPORTANT
Data saved in an application or SD card cannot be erased. To erase data on an SD card,
you must format the SD card.
SD Card (page 7-12)
NOTE
Once in progress, the processing cannot canceled.
Before executing this function, disconnect modular, network, and other cables.
Do not turn off the main power switch while sanitizing the data. If the main power is turned off
during data erasing, erasing will be executed automatically when the power is restored,
however, complete erasure cannot be guaranteed.
Initialize data saved on an optional SSD.
Data Security Kit (E) Operation Guide.
NOTE
This function is displayed when the optional SSD is installed and the optional Data Security Kit
is activated.
7-22
Description
Description
Description