Security Level - Kyocera FS-2020D Operation Manual

>Security Level
High
>NetWare
On
>>Frame Type
Auto
>>Frame Type
?Auto
>>Frame Type
?802.3
>>Frame Type
?Ethernet-II
>>Frame Type
?802.2
>>Frame Type
?SNAP
3-8
Set the Security Level to High.
NetWare
This section explains the procedure for enabling NetWare.
1
Enter the administrator ID and password. Then, if NetWare is set to
>
Off, use or
2
Press .
3
Press [OK]. A blinking question mark (?) appears. Each time you
press or , the selection changes.
4
Display the item you want to set and press [OK].
5
Press [MENU]. The display returns to Ready.
to select On and press [OK].
Connecting and Printing