Specifications; Maintenance And Repairs - Stihl HS 82 Instruction Manual

English

Specifications

EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Engine
STIHL single cylinder two-stroke engine
Displacement: 22.7 cc
(1.39 cu.in)
Bore: 34 mm (1.34 in)
Stroke: 25 mm (0.98 in)
Engine power to 0.7 kW (0.9 bhp)
ISO 7293: at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed: 9,300 rpm
28
Ignition System
Electronic magneto ignition
Spark plug NGK CMR6H,
(resistor type): BOSCH USR 4 AC
Electrode gap: 0.5 mm (0.020 in)
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 0.46 l (15.6 fl.oz)
Weight
complete with cutting attachment, dry,
without blade scabbard
HS 82 T
600 mm (24") blade: 5.1 kg (11.2 lbs)
750 mm (30") blade: 5.3 kg (11.7 lbs)
HS 82 R
600 mm (24") blade: 5.4 kg (11.9 lbs)
750 mm (30") blade: 5.7 kg (12.6 lbs)
Cutting Blade
Sharpening angle to
horizontal:

Maintenance and Repairs

Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers.
Warranty claims following repairs can be
accepted only if the repair has been
performed by an authorized STIHL
servicing dealer using genuine STIHL
replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
45°
HS 82 R, HS 82 T