Network: Advanced - Swann HD Pro-Series Instruction Manual

Network: Advanced

Prior to developing our
SwannLink Peer-to-
Peer technology, our
SwannDNS service
was used to connect
to your DVR remote-
ly. This service is still
active and we recom-
mend creating an ac-
count as a means of
backup.
DDNS:
Click the "Set" button to configure a DDNS service. Go to
swanndvr.com) to create your account then input the details here.
NTP:
The NTP (Network Time Protocol) function allows the DVR to auto-
matically sync its clock with an on-line server. This gives it the ability to
constantly have an accurate time setting.
Email Settings: Click the "Set" button if any changes are required to
your email account.
IP Filter:
An advanced feature which allows you to exercise precise con-
trol over what devices are allowed to communicate with the DVR.
Server Port:
This is the port that the DVR will use to send information
through. The default number will work in most situations.
HTTP Port: This port is used to log into the DVR from a remote location.
UPNP enable:
(mydvr. This option allows your DVR and your router to open and
close the necessary ports and is enabled by default.
UID:
This is the DVR's unique UID. Click "Send UID" to send this to your
email address.
• Click the "Default" button to revert back to default settings.
• Don't forget to click "Apply" to save settings.
• Right-click the mouse to exit the Menu.
40