Installing The Front Bezel; Removing The Drive Cage - Dell OptiPlex 9020 Owner's Manual

Installing the Front Bezel

1. Insert the hooks along the bottom edge of the front bezel into the slots on the chassis.
2. Rotate the bezel toward the computer to engage the front bezel retention clips until they click into place.
3. Install the cover.
4. Follow the procedures in

Removing the Drive Cage

1. Follow the procedures in
2. Remove:
a. cover
b. front bezel
3. Disconnect the data and power cables from the optical drive. Lift the drive cage using the handle to access the
hard-drive cables.
4. Disconnect the data and power cables from the back of the hard drive and remove the drive cage from the
computer.
After Working Inside Your Computer .
Before Working Inside Your Computer .
9