Zone2 Setup - Marantz SR5010 Owner's Manual

Contents Connections

ZONE2 Setup

Makes settings for audio playback with ZONE2.
0 Values set for "Volume Limit" and "Power On Volume" are displayed according to
the setting specified for the volume "Scale". (v p. 158)
o Lch Level
Adjust the left channel output level.
-12 dB – +12 dB (Default : 0 dB)
o Rch Level
Adjust the right channel output level.
-12 dB – +12 dB (Default : 0 dB)
Front panel Display
Playback Settings
o Volume Level
Set the volume output level.
Variable
(Default):
1 – 98
(–79.5 dB – 18.0 dB):
o Volume Limit
Make a setting for maximum volume.
60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)
(Default : 70 (-10 dB))
Off:
0 This can be set when "Volume Level" is set to "Variable". (v p. 216)
216
Rear panel
Tips
Volume can be adjusted.
Volume is fixed at the desired level. The
volume cannot be adjusting using the
remote control unit.
Do not set a maximum volume.
Remote Index
Appendix