Marantz SR5010 Owner's Manual page 163

Contents Connections
o Adjust EQ
Adjust tonal balance for each frequency band.
1. Select the speaker.
2. Select the adjustment frequency band.
63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz /
16 kHz
3. Adjust the level.
–20.0 dB – +6.0 dB (Default : 0.0 dB)
0 Front Dolby and Surround Dolby speakers can only be set when
63 Hz/125 Hz/250 Hz/500 Hz/1 kHz.
Front panel Display
Playback Settings
o Curve Copy
Copy the Flat correction curve created in the Audyssey
0 "Curve Copy" is displayed after Audyssey
0 "Curve Copy" cannot be used when using headphones.
o Set Defaults
The "Graphic EQ" settings are returned to the default settings.
163
Rear panel
Tips
Remote Index
Appendix
® Setup.
® Setup has been performed.