General; Language; Zone2 Setup; Volume Level - Marantz NR1604 Owner's Manual

Contents

General

Make various other settings.

Language

Set the language for display the menu on the TV screen.
English (Default) / Deutsch / Français / Italiano / Español / Nederlands /
Svenska / / Polski
%
• "Language" can also be set by the following procedure. However, the menu
screen is not displayed.
Following the display content to make the setting.
1. Press and hold the main unit's ZONE2 SOURCE and STATUS for at least 3
seconds.
"V.Format:<PAL>" appears on the display.
2. Press the main unit's DISPLAY.
"GUI Language ENGLISH" appears on the display.
3. Use the main unit's ZONE2 SOURCE or INTERNET RADIO and set the language.
4. Press the main unit's STATUS to complete the setting.
Front panel Display
Connections Playback
Rear panel
Settings

ZONE2 Setup

Set the audio to play back with multi-zone (ZONE2).
%
• Values set for "Volume Limit" and "Power On Volume" are displayed according to
the setting specified for the volume "Scale" (vpage 138).
2 Lch Level
Adjust the left channel output level.
–12dB – +12dB (Default : 0dB)
2 Rch Level
Adjust the right channel output level.
–12dB – +12dB (Default : 0dB)

2 Volume Level

Set the volume output level.
Variable (Default) : Volume can be adjusted.
1 – 98 (–79dB – 18dB) : Volume is fixed at the desired level. The
171
Remote
Tips Appendix
volume cannot be adjusting using the remote
control unit.
Index