Engine Oil - GMC 2016 Yukon XL Denali Owner's Manual

Hide thumbs Also See for 2016 Yukon XL Denali:
Table of Contents

Advertisement

1. Positive (+) Terminal. See
Jump Starting - North America
0 326.
2. Battery - North America 0 278.
3. Coolant Surge Tank and
Pressure Cap. See Cooling
System 0 270.
4. Engine Air Cleaner/Filter 0 269.
5. Remote Negative ( ) Location
(Out of View). See Jump
Starting - North America 0 326.
6. Engine Cooling Fans (Out of
View). See Cooling System
0 270.
7. Engine Oil Fill Cap. See When
to Add Engine Oil under

Engine Oil 0 265.

8. Engine Oil Dipstick. See
Checking Engine Oil under
Engine Oil 0 265.
9. Windshield Washer Fluid
Reservoir. See Adding Washer
Fluid under Washer Fluid
0 275.
10. Brake Fluid Reservoir. See
Brake Fluid 0 277.
11. Engine Compartment Fuse
Block 0 288.
Engine Oil
To ensure proper engine
performance and long life, careful
attention must be paid to engine oil.
Following these simple, but
important steps will help protect
your investment:
Always use engine oil approved
to the proper specification and of
the proper viscosity grade. See
Selecting the Right Engine Oil
in this section.
Check the engine oil level
regularly and maintain the
proper oil level. See Checking
Engine Oil and When to Add
Engine Oil in this section.
Change the engine oil at the
appropriate time. See Engine Oil
Life System 0 267.
Always dispose of engine oil
properly. See What to Do with
Used Oil in this section.
Vehicle Care
Checking Engine Oil
If equipped, the ENGINE OIL LOW
ADD OIL message displays when
the engine oil level may be too low.
See Engine Oil Messages 0 146.
Check the oil level before filling to
the recommended level. If the oil is
not low and this message remains
on, see your dealer.
It is also a good idea to check the
engine oil level at each fuel fill. In
order to get an accurate reading,
the vehicle must be on level ground.
The engine oil dipstick handle is a
loop. See Engine Compartment
Overview 0 264 for the location of
the engine oil dipstick.
Obtaining an accurate oil level
reading is essential:
1. If the engine has been running
recently, turn off the engine and
allow several minutes for the oil
to drain back into the oil pan.
Checking the oil level too soon
after engine shutoff will not
provide an accurate oil level
reading.
265

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents