Windshield Wiper/Washer - GMC 2016 Yukon XL Denali Owner's Manual

Hide thumbs Also See for 2016 Yukon XL Denali:
Table of Contents

Advertisement

16
In Brief
There are four positions.
O
: Turns off the automatic
headlamps and Daytime Running
Lamps (DRL). Turn the headlamp
control to the off position again to
turn the automatic headlamps or
DRL back on.
For vehicles first sold in Canada,
the off position will only work when
the vehicle is shifted into P (Park).
AUTO : Automatically turns on the
headlamps, parking lamps,
taillamps, instrument panel lights,
roof marker lamps (if equipped), and
license plate lamps.
;
: Turns on the parking lamps
including all lamps, except the
headlamps.
5
: Turns on the headlamps with
the parking lamps and instrument
panel lights.
See:
Exterior Lamp Controls 0 165
Fog Lamps 0 169

Windshield Wiper/Washer

The windshield wiper control is on
the turn signal lever.
The windshield wipers are controlled
by turning the band with
FRONT on it.
1
: Fast wipes.
w
: Slow wipes.
3
INT : Use this setting for
intermittent wipes or Rainsense .
For intermittent wipes, turn the
FRONT band up for more frequent
wipes or down for less frequent
wipes.
To turn on Rainsense, press
AUTO on the lever, then turn
z
the
FRONT band on the wiper
lever to adjust the sensitivity.
Turn the band up to a higher INT
setting for more sensitivity to
moisture.
Turn the band down to the lower
z
INT setting for less sensitivity to
moisture.
Move the band out of the
position to deactivate Rainsense.
OFF : Turns the windshield
wipers off.
8
: For a single wipe, turn to
then release. For several wipes,
hold the band on
L
: Push the paddle at the top of
the lever to spray washer fluid on
the windshield.
z
See Windshield Wiper/Washer
0 112.
z
3
INT
8
,
8
longer.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents