Performance And Maintenance; Traction Control/Electronic; Stability Control; Tire Pressure Monitor - GMC 2016 Yukon XL Denali Owner's Manual

Performance and
Maintenance
Traction Control/
Electronic Stability
Control
The vehicle has a traction control
system that limits wheel spin and
the StabiliTrak system that assists
with directional control of the vehicle
in difficult driving conditions. Both
systems come on automatically
when the vehicle is started and
begins to move.
To turn off traction control, press
and release on the instrument
panel to the left of the steering
wheel. The traction off light
displays in the instrument
cluster. The appropriate DIC
message displays. See Ride
Control System Messages
0 150.
To turn off both traction control
and StabiliTrak, press and
i
hold until and
in the instrument cluster and the
appropriate DIC message
displays. See Ride Control
System Messages 0 150.
Press and release
turn on both systems.
StabiliTrak will automatically turn on
if the vehicle exceeds 56 km/h
(35 mph). Traction control will
remain off.
See Traction Control/Electronic

Stability Control 0 218.

Tire Pressure Monitor

This vehicle may have a Tire
Pressure Monitor System (TPMS).
i
The low tire pressure warning light
alerts to a significant loss in
pressure of one of the vehicle's
tires. If the warning light comes on,
illuminate
stop as soon as possible and inflate
the tires to the recommended
pressure shown on the Tire and
Loading Information label. See
Vehicle Load Limits 0 194. The
warning light will remain on until the
again to
tire pressure is corrected.
The low tire pressure warning light
may come on in cool weather when
the vehicle is first started, and then
turn off as the vehicle is driven. This
may be an early indicator that the
tire pressures are getting low and
the tires need to be inflated to the
proper pressure.
The TPMS does not replace normal
monthly tire maintenance. Maintain
the correct tire pressures.
See Tire Pressure Monitor System
0 305.

Engine Oil Life System

The engine oil life system calculates
engine oil life based on vehicle use
and displays a DIC message when
it is necessary to change the engine
oil and filter. The oil life system
should be reset to 100% only
following an oil change.
In Brief 23