Using A Frame Pattern To Create Appliqués (1) - Brother PR650e Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
5 Lightly apply fabric glue or spray adhesive to
the back of the appliqué piece that was cut
out, and then attach the appliqué piece to
the base fabric at the position sewn using the
"APPLIQUE POSITION" pattern in step
• If an iron-on stabilizer is used to attach the
appliqué piece to the base fabric, iron the
pieces together without removing the base
fabric from the embroidery frame.
6 After attaching the appliqué piece, sew an
"APPLIQUE" pattern. The appliqué is
finished.
• Depending on the pattern, an "APPLIQUE"
pattern may not be available. In this case,
sew the appliqué using thread in the color
of a part of the embroidery.
7 Finish sewing the embroidery.
Using a frame pattern to
create appliqués (1)
4
.
Appliqués can be created by sewing two frame
patterns of the same size and shape—one sewn
with straight stitches and the other sewn with satin
stitches.
1 Select a frame pattern sewn with straight
stitches to embroider onto the fabric for the
appliqué. Carefully cut outside of the
stitching.
2 Embroider the same pattern on the base
fabric.
Appliqué Sewing 211
7