Magnavox ZC352MW8 Owner's Manual page 84

Symptom
Playback
The disc does not play back.
Discs recorded on this unit
cannot be played back on other
DVD players.
The disc does not start playback
from the beginning.
The unit starts playing back the
disc automatically.
Some functions such as stop,
search, or slow-motion playback
cannot be performed.
The language for the sound track
cannot be changed.
The subtitle language cannot be
changed or turned off.
The angles cannot be changed.
Recording / Timer recording / Editing
The channel cannot be changed
from the channel you are
recording.
Nothing was recorded even
though you set the timer setting
correctly.
Recording does not stop
immediately after you press
[STOP C].
Timer recording is not complete
or did not start from the
beginning.
Others
The unit does not operate
properly.
The disc tray does not open when
you press [OPEN/CLOSE A].
84 84 EN EN
TROUBLESHOOTING
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (page 46).
• The region code on the DVD-video does not match the unit (page 46).
• Moisture has condensed inside the unit. Remove the disc and leave the unit
turned on for about 2 hours until the moisture evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot play back the
disc if it was not finalized.
• If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the disc
after recording (page 44).
• Resume playback was activated (page 52). Press [STOP C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first insert.
• The DVD-video features an auto playback function.
• Depending on the disc, you may not be able to do some of the operations.
Refer to the instruction manual supplied with the disc.
• Multilingual tracks are not recorded being played back.
• The DVD-video prohibits the changing of the language for the sound track.
• Try changing the language using the DVD-video's menu.
• Multilingual subtitle are not recorded on the DVD-video.
• The DVD-video prohibits changing of the subtitles.
• Try changing the subtitle using the DVD-video's menu.
• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc contains
a multi-angle portion. Actual change will be performed when the portion has
come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video's menu.
• Set the TV's input to "TV."
• There was a power failure during recording.
• The unit's internal clock stopped due to a power failure that lasted for more
than 30 seconds. Reset the clock (pages 23- 24).
• Disconnect the AC power cord from the AC outlet, and connect it again.
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.
• It may take a few seconds for the unit to input disc data before recording
stops.
• The timer setting overlapped with another setting that has priority (page 38).
• Disc space was not enough.
• When static electricity, etc., causes the unit to operate abnormally, unplug
the unit and then plug it in again.
• It may take a few seconds for the disc tray to open after you have recorded or
edited a disc.
• This is because the unit is adding disc data to the disc.
Remedy