Magnavox ZC352MW8 Owner's Manual page 34

Digital video disc recorder
Hide thumbs Also See for ZC352MW8:
Table of Contents

Advertisement

BASIC RECORDING & ONE-TOUCH TIMER RECORDING
6
Press [REC I] to start recording.
"I" will be displayed for 5 seconds.
I
Press [PAUSE F] to pause recording.
Press [PAUSE F] ] or [REC I] again to restart
recording.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC I] repeatedly until the desired recording
time (30 minutes to 6 hours) appears on the TV screen.
One-touch timer recording will start.
I
0:30
(normal recording)
6:00
• To cancel one-touch timer recording within the
specified time, press [STOP C].
Note
• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.
• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to "Selecting TV Audio" on page 27 for more details.
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning off the power to stop one-touch timer recording.
- Using [REC I] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby
mode automatically if a timer recording has been programmed. Press [STANDBY-ON y y ] to cancel the timer-
standby mode to use the unit continuously.
34
34
EN
EN
0:30
1:00
5:30
7
Press [STOP C] to stop recording.
The recorded title will appear in the title list.
(Refer to "Guide to a Title List" on page 61.)
e.g.) DVD+R
Writing to Disc
1
NOV/21/07 11:00AM CH12 SP
NOV/21/07
2
EMPTY TITLE
1:41:17 SP(2Hr)
• Press [STOP C] to exit the title list.
90%
SP(2Hr)
0:20:44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents