Magnavox ZC352MW8 Owner's Manual page 85

Digital video disc recorder
Hide thumbs Also See for ZC352MW8:
Table of Contents

Advertisement

Symptom
"Repairing" appears on the TV
screen.
Repairing
In a case you intend to cancel the
repairing process.
Do you want to cancel a repairing process ?
When selecting "Yes", the disc may not be
usable.
Yes
No
Repairing
Error message
Disc Error
— Please eject the disc. —
Playback feature may not be available on
this Disc.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
Parental Lock On
The current selected parental level
prohibits playback.
Recording Error
This program is not allowed to be
recorded.
Recording Error
This program is not recordable in +VR
mode.
Recording Error
Can not record on this disc.
Recording Error
This disc is protected and not recordable.
Recording Error
Disc is full.
(No area for new recording)
Recording Error
You cannot record more than 49 titles on
one disc.
(The maximum is 49)
Recording Error
You cannot record more than 254 chapters
on one disc.
(The maximum is 254)
Recording Error
You cannot record on this disc as Power
Calibration Area is full.
Recording Error
This disc is already finalized.
Recording Error
The disc has a different menu layout. (Set
"Replace Disc Menu" to "ON" to rewrite
the menu.)
* If you are still having trouble with the unit after checking "TROUBLESHOOTING", write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.
TROUBLESHOOTING
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after "Repairing" disappears), a repairing process
will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
• If you intend to cancel the repairing process, press [OPEN/CLOSE A]
on the front panel, then select "Yes" and press [OK]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
Cause
• Unplayable disc is inserted in the unit.
• The disc is upside down.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• The current selected parental level
prohibits playback.
• The recording function encountered the
copy prohibited program.
• You are trying to record the copy-once
program.
• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• The disc is dirty.
• The disc is damaged.
• You are trying to record on to the
protected disc which is set in "Disc Edit"
menu.
• You are trying to record onto the disc
which has no space for recording.
• You are trying to record onto the disc
on which the number of recording titles
comes up to the maximum (49).
• You are trying to record onto the
DVD+RW or DVD-RW on which the
number of recording chapters comes up
to the maximum (254).
• When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
• Every time you insert a disc for recording,
the disc's working area will be taken up.
And if you repeat this frequently, it will
be used up sooner and you may not be
able to record full 49 titles.
• You are trying to record onto the disc
already finalized.
• You are trying to record onto the
disc that had been recorded by other
recorders.
Remedy
Solution
• Insert the standardized disc which bear
the marks on page 46.
• Insert the disc with the labeled side
facing up.
• Insert the DVD-video with region codes
1 or ALL.
• Check "Parental Lock" setting in
"Playback" menu (page 81).
• You cannot record copy prohibited
programs.
• You cannot record the copy-once
program.
• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (page 31).
• Clean the disc with a cleaning cloth.
• Replace the disc.
• Release the disc protect setting in "Disc
Edit" menu (page 72).
• Insert the recordable disc with enough
recording space.
• Delete unnecessary titles (page 62).
• Delete unnecessary chapter marks
(pages 65-66).
• Insert a new disc.
• Release the finalizing for this disc
(page 44).
• Set "Replace Disc Menu" to "ON" to
rewrite the menu, after that you will
record to disc (page 32).
EN
EN
85
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents