Table of Contents
Advertisement
Owner's Manual
ZC320MW8B/F7
d
v
iGital
ideo
© 2011 Funai Electric Co., Ltd.
d
R
isc
ecoRdeR
T
hank you for choosing
n
R
Q
G
/
ead youR
uick
uide and
M
usinG youR
i
f you have Read youR instRuctions and still need assistance
you May access ouR online help at www
1-800-605-8610
oR call
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
M
agnavox
?
eed help fasT
o
'
M
oR
wneR
s
anual fiRst foR Quick tips that Make
aGnavox pRoduct MoRe enjoyable
.
Magnavox
while with youR pRoduct
.
.
,
.
/
coM
supporT
.
Advertisement
Table of Contents
Related Manuals for Magnavox ZC320MW8B
Summary of Contents for Magnavox ZC320MW8B
- Page 1 Quick tips that Make usinG youR aGnavox pRoduct MoRe enjoyable f you have Read youR instRuctions and still need assistance you May access ouR online help at www Magnavox supporT 1-800-605-8610 oR call while with youR pRoduct INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
-
Page 2: Safety Information
SAFETY INFORMATION Safety Instructions The model and serial numbers of this unit may be found on the cabinet. Model No.: You should record and retain those numbers for future reference. Serial No.: WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. - Page 3 • Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. • For product recycling information, please visit - www.magnavox.com Notice for Progressive Scan Output • Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture.
- Page 4 SAFETY INFORMATION Supplied Accessories Cleaning discs • When a disc becomes dirty, clean it with a cleaning Remote Control (NB886UD) with AA (1.5V) battery x 2 cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. •...
-
Page 5: Trademark Information
Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law. MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co. Ltd. and Funai Corporation, Inc. under license from Philips Electronics North America. -
Page 6: Table Of Contents
CONTENTS Introduction Recording SAFETY INFORMATION ......2 INFORMATION ON DVD RECORDING ... . . 24 Safety Instructions . - Page 7 CONTENTS Playback Editing INFORMATION ON PLAYBACK ....41 INFORMATION ON DISC EDITING....56 BASIC PLAYBACK .
-
Page 8: Features
FEATURES This unit not only plays back DVD and CD but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit. Recording Editing This unit is compatible with DVD+RW/DVD-RW, which Deleting titles: are rewritable repeatedly and DVD+R/DVD-R, which are You can delete titles which you do not need anymore. -
Page 9: Symbols Used In This Owner's Manual
FEATURES Symbols Used in this Owner’s Manual To specify for what disc type each function is, we put the following symbols at the beginning of each item to operate. * DVD-RW/-R recorded in VR mode or non compatible recording format are not playable. * DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 66). -
Page 10: Functional Overview
FUNCTIONAL OVERVIEW Front Panel 12 11 * ( * ) The unit can also be turned on by pressing these buttons. 1. Disc tray 8. VIDEO input jack (L2) Place a disc when it is open. Use to connect external device with an RCA video 2. -
Page 11: Rear Panel
FUNCTIONAL OVERVIEW Rear Panel 1. VIDEO IN jack (L1) 6. COMPONENT VIDEO OUTPUT jacks • Use to connect external device with an RCA video • Use to connect a TV monitor with component video cable. inputs with a component video cable. 2. -
Page 12: Remote Control
FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Using a Remote Control Keep in mind the following when using the remote Install 2 AA (1.5V) batteries matching the polarity control: indicated inside battery compartment of the remote •... - Page 13 FUNCTIONAL OVERVIEW ( * ) The unit can also be turned on by pressing these buttons. 1. STANDBY/ON y button 18. RETURN button • Press to turn on the unit, or to turn the unit to the Press to return to the previously displayed menu screen.
-
Page 14: Connection
CONNECTION Read this first: 1) Disconnect the AC power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) After making all the connections, connect the AC power cords of the devices. • Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system. -
Page 15: Video Input Jacks
CONNECTION Connecting to a TV with Component Video Input jacks COMPONENT (Green) (Green) VIDEO IN (Green) (Blue) (Blue) RCA component video cable (Blue) (Red) (Red) (Red) AUDIO IN RCA audio cable rear of this unit Supplied cables used in this connection are as follows: •... -
Page 16: Connecting To A Tv With
CONNECTION Connecting to a TV with Audio / Video Input Jacks VIDEO IN RCA video cable AUDIO IN RCA audio cable rear of this unit Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 •... -
Page 17: Digital Audio Connection
CONNECTION Digital Audio Connection Coaxial Cable Connection Dolby Digital decoder rear of this unit COAXIAL digital audio coaxial cable digital audio coaxial input jack To set up “Dolby Digital” refer to pages 68 and 71-72. Audio format (disc) Dolby Digital Setting of this unit Digital Output 2channel PCM Dolby Digital... -
Page 18: Before You Start
Refer to your TV’s user manual for details. • If more than 10 minutes have passed since you have turned on the unit, you may see the MAGNAVOX screen saver instead of “Initial Setup” menu. MAGNAVOX screen saver: Proceed to step 2 in “INITIAL SETTING”... -
Page 19: Guide To On-Screen Display / Menu
BEFORE YOU START Guide to On-Screen Display / Menu This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference. - Page 20 BEFORE YOU START MP3 Tag Information • First, track name will be displayed. Track Name • If you press [DISPLAY] one more time, artist name will be displayed. Artist Name • If you press [DISPLAY] one more time, album name will be displayed.
-
Page 21: Main Menu
BEFORE YOU START Main Menu Press [MENU] to display the main menu. Then use 1. General Setting: [K / L] to select a menu and press [OK] to display the To go to general setting menu. menu. These menus provide entries to all main functions 2. -
Page 22: Initial Setting
INITIAL SETTING You need to follow these steps when you turn on this unit for the first time. Follow the procedure in “Finding the Viewing Channel on Your TV” on page 18 to display “Initial Setup” menu. Use [K / L] to select your desired language, then press [OK]. -
Page 23: Setting The Clock
SETTING THE CLOCK Set the clock before you try the timer programming. Follow these steps below. Press [MENU] and use [K / L] to Use [{ / B] to select an item to set, select “General Setting”, then press and use [K / L] to select the contents [OK]. -
Page 24: Information On Dvd Recording
INFORMATION ON DVD RECORDING Before you make a recording, read the following information. Recording Mode Recordable Discs This unit can record to DVD+RW, DVD+R, DVD-RW and You can select a recording mode among 6 options, and DVD-R. the recording time will depend on the recording mode DVD+R/DVD-R can only be recorded to once. -
Page 25: Before Recording
BEFORE RECORDING Make Recording Compatible Setting for Auto Chapter You can set a specified time for chapter marks. Use this feature to make unfinalized +VR mode discs 1) Press [MENU] and use [K / L] to select “General recorded on other unit recordable on this unit. When you Setting”, then press [OK]. -
Page 26: Basic Recording & One-Touch Timer Recording
BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs. This unit has no tuner system so cannot receive TV broadcasts without external tuner or such devices. Press [STANDBY/ON Turn on the TV and be sure to select the input to which the unit is connected. - Page 27 BASIC RECORDING & ONE-TOUCH TIMER RECORDING Press [REC] to start recording. Press [STOP C] to stop recording. “I” will be displayed for 4 seconds. The recorded title will appear in the title list. (Refer to “Guide to a Title List” on page 56.) e.g.) DVD+R SP(2Hr) 0h58m...
-
Page 28: Timer Recording
TIMER RECORDING You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure • Connect the external tuner to either L1 or L2 and set it to output audio/video signals when it comes to the time you want to start recording. -
Page 29: Timer Recording
TIMER RECORDING Use [K / L] to select the appropriate Press [OK] when all items are entered. external input position (L1/L2) to After displaying an instructive message for 10 seconds, timer program list will appear. which your external tuner is connected, then press [B]. - Page 30 TIMER RECORDING Putting Names on Timer Programs To stop the timer recording in progress 1) In stop mode, press [TIMER PROG.]. 1) Press [STOP C ] on the remote control. 2) Use [K / L] to select the program you want to edit 2) Confirmation message will appear.
-
Page 31: Hints For Timer Recording
TIMER RECORDING Hints for Timer Recording • If there is a power failure or this unit has been unplugged • When the starting and the ending time are the same, for more than 30 seconds, the clock setting and all timer “Exceeds 12 hours”... -
Page 32: Satellite Link
SATELLITE LINK You can set the unit to start recording whenever it detects the video signal from the external tuner. Preparing for the satellite link timer recording: Preparation on the tuner • Satellite link accepts only the connection from L1 (rear) with the external tuner. (The connection from L2 cannot read any signals from the external tuner.) •... - Page 33 SATELLITE LINK Press [OK]. “To Standby Mode” is highlighted. Press [OK] again. Satellite Link Start Mode 5:00PM SP (2Hr) To Standby Mode In a second, the unit will be turned off automatically as it goes into the satellite link standby mode. To cancel the satellite link function while in the satellite link standby mode: Press [STANDBY/ON y] to turn on the unit.
-
Page 34: Overwriting Unnecessary Title
OVERWRITING UNNECESSARY TITLE Overwriting from the Beginning of the Title Overwriting in the Middle of the Title You can overwrite the existing title from the beginning. You can overwrite the existing title from the selected position. 1) Press [STANDBY/ON y ]. Make sure that the TV input is set on the unit. -
Page 35: Hints For Overwriting
OVERWRITING UNNECESSARY TITLE Hints for Overwriting When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point. When overwriting title is shorter than the existing title: (overwriting from the beginning of the title) overwrite... -
Page 36: Settings For An External Device
SETTINGS FOR AN EXTERNAL DEVICE Connection to an External Device Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front) or L1 (Rear). Use S-video or the RCA audio/video cables for this connection. -
Page 37: Recording From An External Device
SETTINGS FOR AN EXTERNAL DEVICE Recording from an External Device Before recording from an external device, refer to the instructions for the connection on page 36. Turn on the TV and press [STANDBY/ON ], and be sure to select the input of the TV to which the unit is connected. -
Page 38: Setting A Disc To Protect
SETTING A DISC TO PROTECT To prevent accidental recording, editing or erasing the titles, you can protect them from “Disc Edit” menu. Press [MENU]. Use [K / ] to select “Disc Edit”, then press [OK]. Use [K / L] to select “Disc Protect OFF ON”, then press [OK]. -
Page 39: Playing The Discs On Other Dvd Players
PLAYING THE DISCS ON OTHER DVD PLAYERS Finalizing a Disc Press [MENU]. You will need to finalize DVD+R, DVD-RW or DVD-R to play them back on other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a Use [K / L] to select “Disc Edit”, then longer time period for finalization. -
Page 40: Auto Finalizing
PLAYING THE DISCS ON OTHER DVD PLAYERS Auto Finalizing Press [MENU] and use [K / L] to You can finalize discs automatically using this function. select “General Setting”, then press You can use this function to finalize discs after finishing timer recordings and at the end of the disc space. -
Page 41: Information On Playback
INFORMATION ON PLAYBACK Before you play back DVD, read the following information. Playable Discs and Files Unplayable Discs This unit is compatible to play back the following discs. The following discs will not play back on this unit. To play back a DVD, make sure that it meets the •... -
Page 42: Information On Playback
INFORMATION ON PLAYBACK PBC (playback control) for Video CD Hint for DVD Playback You can select images or information on the menu screen The contents of DVD are generally divided into titles. by activating the PBC (playback control) function of the Titles may be further subdivided into chapters. -
Page 43: Basic Playback
BASIC PLAYBACK Direct Playback Press [STANDBY/ON y]. Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. Align the disc to the disc tray guide. -
Page 44: Playback From The Title List
BASIC PLAYBACK Playback from the Title List Press [STANDBY/ON Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. - Page 45 BASIC PLAYBACK Use [K / L] to select “Play”, then If you want to see disc information, press [{ ] when the press [OK]. first page of the title list is displayed or press [ K ] when the first title is selected but not when “Play”, “Edit” or “Overwrite”...
-
Page 46: Playing Back An Audio Cd And A Cd-Rw / -R
BASIC PLAYBACK Playing Back an Audio CD and a CD-RW / -R with MP3 Files Follow steps 1 to 2 in “Direct Playback” on page 43. Press [OPEN/CLOSE A] to close the disc tray. It may take a while to load the disc data after the disc tray closes. -
Page 47: Using The Title / Disc Menu
BASIC PLAYBACK Using the Title / Disc Menu DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. 1) Press [TITLE] or [DISC MENU] to call up the title list or disc menu. -
Page 48: Special Playback
SPECIAL PLAYBACK Resume Playback Skipping TV Commercials During Playback You can play back from where you stopped playing back the disc last. 1) During playback, press [STOP C]. You can skip TV commercials to enjoy the recorded The resume message will appear. programs without interrupting. -
Page 49: Step By Step Playback
SPECIAL PLAYBACK Step by Step Playback Zoom 1) During playback, press [PAUSE F]. 1) During playback, press [DISPLAY] to bring up the display menu. Playback will be paused and sound will be muted. 2) Press [G] repeatedly. 2) Use [{ / B] to select to display the selection Playback will advance one frame (or step) at a time menu. -
Page 50: Marker Setting
SPECIAL PLAYBACK Marker Setting Repeat Playback Available repeat function may vary depending the discs. 1) During playback press [DISPLAY] to bring up the display menu, then proceed to step 2), or press [REPEAT] then proceed to step 3). This feature allows you to assign a specific point on a disc If the display menu is already shown, skip to step 2. -
Page 51: Random Playback
SPECIAL PLAYBACK Random Playback Program Playback You can play back a disc randomly instead of playing You can program the disc to play back in your desired back in the original order. order. 1) Press [MENU]. 1) Press [MENU]. 2) Use [K / L] to select “DISC Playback Mode”, then press [OK]. -
Page 52: Search
SEARCH Title / Chapter Search Track Search Using [H] / [G] Using [H] / [G] 1) During playback, press [G] to skip the current 1) During playback, press [G] to skip the current title track/file and move to the next. or chapter and move to the next. -
Page 53: Time Search
SEARCH Time Search 1) During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. 2) Use [{ / B] to select , then press [OK]. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video... -
Page 54: Selecting The Format Of Audio And Video
SELECTING THE FORMAT OF AUDIO AND VIDEO You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack DVD-video may have subtitles in 1 or more languages. When playing back a DVD-video recorded with 2 or more Available subtitle languages can be found on the disc soundtracks (these are often in different languages), you... -
Page 55: Switching Virtual Surround System
SELECTING THE FORMAT OF AUDIO AND VIDEO Switching Virtual Surround System Switching Camera Angles Some DVD-video have scenes shot from 2 or more angles. Angle information should be on the disc case if You can enjoy stereophonic virtual space through your the disc contains multi-angle scenes. -
Page 56: Information On Disc Editing
INFORMATION ON DISC EDITING Guide to a Title List Editing Discs Title list allows you to check the titles recorded on the You can edit discs for the following items. Be sure that disc easily. You can choose a title to play back from this once you edit titles, they will not remain as original. -
Page 57: Editing Discs
EDITING DISCS Deleting a Title You can delete a title which you do not need anymore. Use [K / L] to select “Edit”, then Please be advised that the titles once deleted cannot be press [OK]. brought back to the disc. For DVD+RW/DVD-RW, when the last recorded title in the SP (2Hr) title list is deleted, the available disc space to record on... -
Page 58: Putting Names On Titles
EDITING DISCS Putting Names on Titles You can put title names on the titles and change the names from this menu. Use [K / L] to select “Yes”, then press [OK]. Edit - Edit Title Name MY FAVORITE 1 : 05 : 00 The name you entered will be activated for the title. -
Page 59: Setting Chapter Marks
EDITING DISCS Setting Chapter Marks You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. Follow steps 1 to 3 in “Deleting a Title” on page 57 to display “Edit” menu. -
Page 60: Clearing Chapter Marks
EDITING DISCS Clearing Chapter Marks Follow steps 1 to 3 in “Deleting a Title” on page 57 to display “Edit” menu. Use [K / L] to select “Chapter Mark”, then press [OK]. Submenu will appear. Use [H] / [G] to select a chapter mark to be deleted, then press [PAUSE F]. - Page 61 EDITING DISCS To delete all chapter marks Follow steps 1 to 3 in “Deleting a Title” on page 57 to display “Edit” menu. Use [K / L] to select “Chapter Mark”, then press [OK]. Submenu will appear. Use [K / L] to select “Delete All”, then press [OK].
-
Page 62: Hiding Chapters
EDITING DISCS Hiding Chapters You can hide chapters from the title list. Hidden chapters are skipped during playback. Follow steps 1 to 3 in “Deleting a Title” on page 57 to display “Edit” menu. Use [K / L] to select “Hide Chapter”, then press [OK]. -
Page 63: Setting Pictures For Thumbnails
EDITING DISCS Setting Pictures for Thumbnails You can set your desired scene as a thumbnail for each title. Follow steps 1 to 3 in “Deleting a Title” on page 57 to display “Edit” menu. Use [H], [G], [E], [D], [PAUSE F] and [PLAY B] to decide the picture you want to select as a thumbnail. -
Page 64: Dividing A Title
EDITING DISCS Dividing a Title You can divide one title into 2 new titles. Follow steps 1 to 3 in “Deleting a Title” on page 57 to display “Edit” menu. Use [H], [G], [E], [D], [PAUSE F] and [PLAY B] to decide the point at which you will divide the title. -
Page 65: Putting Name On Disc
EDITING DISCS Putting Name on Disc You can put a name on the disc and change it from this menu. Press [STOP C] if you are playing back a disc. Press [MENU]. Use [K / L] to select “Disc Edit”, then press [OK]. -
Page 66: Erasing Disc
EDITING DISCS Erasing Disc You can erase all titles on a disc. Press [STOP C] if you are playing back a disc. Follow steps 1 to 2 in “Putting Name on Disc” on page 65 to display “Disc Edit” menu. Use [K / L] to select “Erase Disc”, then press [OK]. -
Page 67: Making Edits Compatible
EDITING DISCS Making Edits Compatible If you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” to see those effects on another unit. Press [STOP C] if you are playing back a disc. Follow steps 1 to 2 in “Putting Name on Disc”... -
Page 68: List Of Settings
LIST OF SETTINGS The following table is the contents which you can set and the default setting. Refer to the following table for useful operation. Menu Items (highlight is the default) Contents Playback Parental Lock Set the parental level for DVD playback. Pages 70-72 level 8 [Adult] to 1 [Kid Safe] Disc Audio... - Page 69 LIST OF SETTINGS Menu Items (highlight is the default) Contents Video Progressive Scan Set to the progressive scan mode (set to "ON") Page 76 or to the interlace scan mode (set to "OFF"). TV Aspect Set a picture size according to aspect ratio of 4:3 Letter Box your TV.
-
Page 70: Setups
SETUPS Playback Press [STOP C] if you are playing back a disc. Press [MENU] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Playback”, then press [OK]. General Setting Playback Display... - Page 71 SETUPS Parental Lock (Default: OFF) Note • Press [CLEAR] to erase numbers entered incorrectly. Some DVD-video feature a parental lock level. Playback • When you forget the password or you want to clear will stop if the ratings exceed the levels you set, it will all settings in “Parental Lock”...
- Page 72 SETUPS Playback (cont’d) Dolby Digital (Default : Stream) If “Other” is selected for , press 4-digit code using [the Number buttons]. Use [K / L] to select a setting, then press [OK]. Dolby Digital Code Input Stream Your setting will be activated. •...
-
Page 73: Display
SETUPS Display Press [STOP C] if you are playing back a disc. Press [MENU] and use [K / L] to select “General Setting”, then press [OK]. Use [K / L] to select “Display”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. - Page 74 SETUPS Display (cont’d) V-Chip MPAA Rating With the V-chip system in this unit, you can set the TV Rating viewing limitation for the analog/digital TV programs received from the external tuner or recorded on DVDs to Canadian English Rating prevent your children from watching inappropriate programs.
- Page 75 SETUPS [Canadian French Rating] Change Password Rating Category Change the current password. 18ans+ Adult audience only higher Use [the Number Buttons] to enter new access 16ans+ Unsuitable for ages under 16 password. 13ans+ Unsuitable for ages under 13 Note 8ans+ Unsuitable for ages under 8 •...
-
Page 76: Video
SETUPS Video Progressive Scan (Default : OFF) This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”. 1) Use [K / L] to select “ON“, then press [OK]. -
Page 77: Troubleshooting
TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Remedy The power does not turn on. - Page 78 TROUBLESHOOTING Symptom Remedy Discs recorded on this unit cannot • If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the be played back on other DVD disc after recording (page 39). players. The disc does not start playback •...
- Page 79 TROUBLESHOOTING Disc Error message Cause Solution Disc Error • Unplayable disc is inserted in the unit. • Insert the standardized disc which bear — Please eject the disc. — • The disc is upside down. the marks on page 41. Playback feature may not be available on •...
-
Page 80: Language Code
LANGUAGE CODE Language Code Language Code Language Code Abkhazian 4748 Hungarian 5467 Russian 6467 Afar 4747 Icelandic 5565 Samoan 6559 Afrikaans 4752 Indonesian 5560 Sangho 6553 Albanian 6563 Interlingua 5547 Sanskrit 6547 Amharic 4759 Interlingue 5551 Scots Gaelic 5350 Arabic 4764 Inupiak 5557... -
Page 81: Glossary
GLOSSARY Analog Audio PCM (pulse code modulation) An electrical signal that directly represents sound. The most common system of encoding digital audio, Compare this to digital audio which can be an electrical found on CD and DAT. Excellent quality, but requires a signal, but is an indirect representation of sound. -
Page 82: Specifications
SPECIFICATIONS General Power requirements 120V AC, 60Hz Power consumption 16W (standby: 1.8W) Dimensions (width x height x depth) 12.8 x 2.4 x 10.6 inches (325 x 59 x 267mm) Weight 3.97 lbs. ( 1.80kg ) Operating temperature 41°F (5°C) to 104°F (40°C) Operating humidity Less than 80% (no condensation) Recording... -
Page 83: Español
ESPAÑOL Discos Reproducibles Disco Grabable Este aparato es compatible con la reproducción de los Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y siguientes discos y archivos. DVD-R. Los discos DVD+R/DVD-R pueden ser grabados sólo una Discos reproducibles Logotipos vez. Los discos DVD+RW/DVD-RW pueden ser grabados y borrados muchas veces. - Page 84 ESPAÑOL Conexión Básica VIDEO IN cable RCA de video AUDIO IN cable RCA de audio parte trasera de este aparato...
- Page 85 ESPAÑOL Grabación Básica Configuración Inicial Cuando usted encienda este aparato por primera vez Presione [OPEN/CLOSE A] necesita seguir estos pasos. para abrir la bandeja de discos e insertar su disco con el rótulo aupntando Presione [STANDBY/ON hacia arriba. Presione de nuevo [OPEN/CLOSE A] para cerrar la Encienda el televisor.
- Page 86 ESPAÑOL Grabación con Temporizador Usted puede programar el equipo para que grabe hasta 12 programas, con un mes de anticipación. También hay disponibles grabaciones de programas diarias o semanales. Antes de grabar, asegúrese de que • Cuando llegue el momento en que desea empezar a grabar, conecte el sintonizador externo a ya sea L1 o L2 y configúrelo para dar salida a las señales de audio/video.
- Page 87 ESPAÑOL Reproducción Presione [STANDBY/ON Abra la bandeja de discos, y Inserte un disco. Cerrar la bandeja de discos. Comience a reproducir. Detenga la reproducción.
-
Page 88: Limited Warranty
CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval. To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at: FUNAI SERVICE CORPORATION Tel: 1-800-605-8610 www.magnavox.com/support 2200 Spiegel Drive Groveport, OH 43125 Printed in China E7PAAUD 1VMN30493A ★★★★...