Brother HL-2250DN Service Manual page 143

Front Press the [Go] button
cover when sifting the mode
Open Twice
Three times
Four times
Five times
More than six times
More than 2 seconds
CAUTION :
*1 Start the test printing, when the function is performed with HL-2130/2220/2230/2240.
*2 Start the test printing, when the function is performed with HL-2130/2220/2230/2240/
2240D.
*3 Start the Maintenance printing, when the function is performed with the models of the
non-installing duplex.
Press the [Go] button
when selecting the
function
Once 18) Printing for Maintenance
Twice 19) Maintenance and Frame
Three times 20) Network Configuration
Four times 21) Sleep Mode Setting (ON/
Five times 22) Develop Roller Counter
Six times 23) Develop Roller Counter
Seven times 24) Develop Roller Counter
Eight times 25) USB Speed Fix Mode
Nine times 26) Sleep Mode Indication
More than ten times Shift to ready state
Once Factory use (not used)
Twice Factory use (not used)
Three times Factory use (not used)
Four times Factory use (not used)
Five times Factory use (not used)
Six times Factory use (not used)
Seven times Factory use (not used)
Eight times Invalidity
Nine times 27) Inspection Mode Unlock
Ten times Factory use (not used)
Eleven times Invalidity
Twelve times Factory use (not used)
More than thirteen Shift to ready state
times
None 28) Rewrite Firmware Mode
Once Factory use (not used)
Invalidity
29) PIT3 Mode
5-4
Function
*3
Pattern Print
Print (Network Model
*2
Only)
OFF)
Reset (For the starter
toner cartridge)
Reset (For the standard
toner cartridge)
Reset (For the high-
capacity toner cartridge)
(OFF/Dimmed)
Refer
to:
5-9
5-11
5-11
5-11
5-11
5-11
5-11
5-11
5-11
5-12
5-12
5-12
Confidential