Fuser Unit - Brother HL-2250DN Service Manual

9.10 Fuser Unit

(1) Release the Harness of the Fuser unit from the Guides of the Main frame R ASSY.
(2) Disconnect the Connector of the Low voltage power supply PCB ASSY while pushing
the Hook of the Connector of the Fuser unit.
Main frame R ASSY
Connector
(low voltage power
supply PCB ASSY)
(3) Put the Connector of the Fuser unit through the Hole of the Main frame R ASSY.
Connector
(low voltage power
supply PCB ASSY)
Hook
Fig. 3-31
Fig. 3-32
3-35
Guides
Connector (fuser unit)
Connector (fuser unit)
Hole
Connector (fuser unit)
Guide
Confidential