You can select the following functions in this menu:
The picture signal can be adjusted to fit your TV:
for a 'wide-screen' display with black bars on the top and bottom
'
' for a full-height picture with the sides trimmed
for wide-screen TV
Adapts the color dynamic for NTSC playback when set to ON.
This allows you to move the picture left or right using the D , C buttons in order to adjust
the picture to your TV screen.
Depending on the audio outputs being used, this menu provides you with a selection of settings.
If you are only using the analog audio outputs (red and white AUDIO OUT L/R), select '
the '
' menu.
You can select from the following settings for devices connected to the DIGITAL AUDIO
OUT jack.
: Dolby Digital and DTS signals are going out unchanged to the digital output. MPEG-2
Multi-channel signals are converted to PCM (Pulse Code Modulation).
Use receivers/amplifiers
: Dolby Digital and MPEG-2 Multi-channel signals are converted to PCM (Pulse Code
Modulation).
Use receivers/amplifiers
: digital output turned off.
Use devices
User preferences
.
.
' in
.
ï