Magnavox MDV630R Owner's Manual page 73

PROBLEM
Programming a recording (TIMER)
SOLUTION
b
While a programmed recording is being made, you cannot operate your DVD recorder
manually. If you want to cancel the programmed recording, press STANDBY m .
b
The DVD recorder was switched on before the start of a programmed recording.
Turn off the DVD recorder by pressing STANDBY m . A programmed recording (timer) will
only function if the DVD recorder is switched off (button STANDBY m ).
b
Either no disc was inserted or a disc was inserted that cannot be used for recordings. Insert a
disc that can be recorded upon. Turn off the DVD recorder by pressing STANDBY m .
b
A protected disc was inserted. Undo the erase protection or insert a different disc.
b
If this error message appears after pressing TIMER , then all TIMER blocks are already
programmed. No more recordings can be programmed. Press the C button. If you want to
clear or check a programmed recording, select it with A or B .
b
The data for the recording could not be transferred. Please check date, start time, and end
time of the programmed recording.
b
The timer recorder overlaps with another timer recording.
b
If you ignore this warning, the programmed recording with the early start time will start first.
The second recording will then lack the beginning.
b
Change the information from one of the two recordings.
b
Delete one of the two recordings.