Magnavox MDV630R Owner's Manual page 39

This function uses the information sent via the local PBS channel to automatically set the
time/date. For this reason, you must enter the PBS channel that sends this additional information.
When the DVD recorder chooses a wrong PBS channel or the displayed time/date is wrong, you
must manually set the date/time (see section 'Manually setting the time & date').
1
Press SYSTEM-MENU on the remote control. The menu bar
will appear in the display.
2
' using D or C .
Select '
3
Select line '
4
Select '
5
Select the corresponding line with B or A .
6
Select the channel which sends the time/date information in the
line '
will check whether or not the information transfer is possible.
a
b No time/date data can be received from this TV channel.
Select a different channel or '
7
Select how switching will be done in line '
(' / /
By selecting '
to the 'summer time' schedule of the PBS channel.
8
In the line '
entered was for a different time zone. This is the only way to set
the time correctly, or, if necessary, to correct it.
If you want to use the time zone of the PBS channel, select
' '.
9
Confirm each line with OK .
10
To end, press SYSTEM-MENU .
The time and date are automatically transferred from the selected 'PBS channel' after the
recorder is shut off.
Installing your DVD recorder
' using B or A and confirm with C .
' with B or A and confirm with C .
' and confirm with OK . The DVD recorder
' in line '
').
', the time will be automatically set according
', select your time zone if the PBS channel
'.
':