Magnavox MDV630R Owner's Manual page 70

5
Confirm with OK .
a
b The channel number of the TV channel has not yet been assigned
Guide. Using C , D or the number buttons 0..9 on the remote
control, select the corresponding Guide channel number (name) of
the TV channel and confirm with OK .
a
b The entered PlusCode number is incorrect. Correct your entry or
cancel using the SYSTEM-MENU button.
b Check the time/date (see chapter 'Initial installation', section 'Setting
the time and date').
a
b A daily recording was entered for the wrong day. Daily programming
can only be used for recordings to be made from Monday to Friday.
6
The data appears after confirmation. You can go back to change
the data. Select the field with C or D . Change the information
with A , B or the number buttons 0..9 .
Select the '
recording mode '
7
If all information is correct, press the
programming information is stored in a TIMER block.
8
To end, press TIMER .
9
Insert a recordable disc in the Recorder.
10 Switch off the Recorder with STANDBY m .
The programmed recording will only function properly when the
DVD recorder
STANDBY m button.
If any of the TIMER blocks are in use and the recordings are set ot occur, 's' will light up on
the display.
' input field using C . Using B , A select the
, , , '.
has been
OK button. The
using the
Programming a recording (TIMER)