Clarion NX501E Owner's Manual & Installation Manual page 76

closer you are to get the valid GPS position.
When GPS position is available, the Vehimarker is displayed in full colour, now showing your current
position.
There are screen buttons and data fields on the screen to help you navigate. During navigation, the
screen shows route information.
By default, only one data field is displayed in the bottom right corner. Tap this field to see all route
data fields.
Tap any of the data fields to suppress others and display only the selected one. The data fields are
different when you are navigating an active route and when you have no specified destination (the
orange line is not displayed).
Default data fields when cruising without a destination (tap and hold any of the fields to change
its value):
Field
Downloaded from Caradio-Manual.com Manuals
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains it.
Shows the current time corrected with time zone offset. The accurate time
comes from the GPS satellites, and the time zone information comes from the
map or it can be set manually in Regional settings.
(The current time is always displayed in the top left corner of menu screens.)
Description