Chapter 9 Installing The Bwx 120 Pcmcia Modem - Cisco BWX 120 User Manual

Installing the BWX 120 PCMCIA Modem
The following instructions explain how to install the BWX 120 PCMCIA Modem and its driver software
on your computer. Please read all instructions before attempting the installation.
Note The laptop should be used preferably on a desk when the Modem is installed. Using the laptop with the
Modem close to the body, such as on the lap, is undesirable.
Note The screenshots shown in these instructions were taken from a laptop operating with Windows XP. If
you have a Windows 2000 or Vista operating system, the screens you see may vary from the screens
shown in the instructions.
Step
Step 1
Step 2
Step 3
OL-16321-03
Action
Insert the modem into the Type II
modem slot on your computer. Be
sure to insert the end that has the
68-pin connector into the modem
slot.
Raise the antenna to the upright
position.
The Found New Hardware message
appears indicating the PC sees the
modem.
9
C H A P T E R
Illustration
BWX 120 PCMCIA Modem User Guide
9-1