Table of Contents
Advertisement
Cisco BWX360 WiMAX Outdoor Modem / engbt / 253306943 / Installation.fm / 07.04.2010
Installing the Cisco BWX360 WiMAX Outdoor Modem
Installing the Cisco BWX360 WiMAX Outdoor
Modem
For installing the Cisco BWX360 WiMAX Outdoor Modem you have to perform the fol-
lowing steps:
1. Choosing locations (see page 9)
2. Setting up the antenna mast (see page 10).
3. Protecting the mast against lightning (see page 10)
4. Assembling the outdoor modem (see page 12)
5. Connecting the indoor unit (see page 15)
When the installation is completed you have to perform the following steps in order to
put your Cisco BWX360 WiMAX Outdoor Modem into operation:
1. Preparing to use the Cisco BWX360 WiMAX Outdoor Modem (see page 17)
2. Launching the user interface (see page 18)
3. Connecting to the WiMAX network and the Internet (see page 19)
4. Precisely aligning the antenna (see page 21)
5. Finishing off the assembly (see page 22)
The Cisco BWX360 WiMAX Outdoor Modem must be assembled and put
into service by a qualified electrician.
8
Only commence the outdoor work once you have taken all the neces-
sary steps to make the location safe.
Be sure to observe the safety precautions.
Advertisement
Table of Contents
